View Full Version : 1500 grade wet`ndry
24-05-02, 10:32 AM
Where do i buy 1500 grade wet`ndry, most harware stores only bloody have 1200 grade, and i need finer to start to cut back my car...
or would 1200 b ok???
automotive paint stores should have 1500 grade wet n dry, but try 2000 grade before going onto the harsher stuff. How bad is the paint that needs to be cut back? very orange peeled look?
24-05-02, 11:34 AM
yeah its fairly rough, mostly on the roof.. thats why i was thinking 1500 first, beter to play it safe i guess tho..
24-05-02, 11:50 AM
theres the paint as it is now
very ruff and a bit peely...
So it's just been resprayed? How many coats have been applied? To be on the safe side i'd start on 1800-2000 grit. It'll take some time, but it'll be worth it.
1200 or 1500 to start should be fine. How many coats do you have? If you have only a few start @ 1500. If you have 8 or more go the 1500 to be safe.
Make sure you finish off with 2000.
24-05-02, 07:04 PM
if its that rough....ie that much peel... u can get away with 800 for big flat surfaces like the roof. Make sure tho as soon as there's only a little peel left that you stop. this way u can switch to 1200 and get rid of the last bit of peel and the scratches caused by the 800.
. but donot go near an edge at all!!!!!!!!!!
wait until u get 1200 of 1600 until u go near an edge.
i have done it this way b4.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.