Spac's under $50 sale - Mazda bits.

[Spac]

Cleaning out stuff I'm probably never going to use... probably nobody else will either, but I see way too many people spending good money at wrecker for me to feel good about thowing it out...:) Everything is in good condition unless stated otherwise.

WHEELS
4x Cheviot 13x6 four spoke alloys 4x110 pattern. $50 the set.
4x Mazda S1 RX-7 wheels 4x110 pattern, 2 good tyres. Excellant condition. $50 the set
3x Mazda S2 RX-7 alloys, 4x110 pattern. Scruffy but round. $15 each.

4x 14x7 steelies to suit RX-5, 1500, 929L etc. 4x120 pattern. old race tyres. $50 the set
4x 14x7 Neales steelies, 4x120 pattern, no tyres $50 set.
3x 14x6 Kidney / Jellybean alloys, 4x120 pattern, no tyres, $10 each
8x 14x5.5 Mazda RX-5 factory alloys. $15 each.

Rotary Motor Stuff
*Complete 12A twin dizzy motor. Seized. $50.
*12A twin dizzy motor, no sump. Unknown condition. $20.
*12A 6-port motor. Low compression, no sump. $50.
*Auto starter motors. $10 each.
*Four Barrel carbs, 12A and 13B. Unknown condition (look OK) $20 each.
*Stocker intake manifolds, 12A and 13B. $5 each (or free with carby).
*S2 RX-7 flywheel (lightest factory type). $10.
*12A twin dizzy rotors. Perfectly usable, or make book-ends. $5 each.
*Single dizzy points dizzy. Works perfectly. $25.
*S1 RX-7 electronic dizzy, comes WITH EXTERNAL MODULES. $50.
*Assorted end housings. $10 each, less for crappy ones.
*12A twin dizzy rotor housings. $50 each.

Piston motor Stuff
*NA/VC/MA starter motors. $5 each.
*929 4-speed. Works perfectly, no noises $10.
*929 stocker exhaust. $5.
*EFI intake manifold, no injectors or fuel rail, suits NA/VC/MA. $10.
*Single Weber manifold to suit NA/VC/MA. $50.

Mechanical stuff
*929 struts, inc spring, brakes etc. $10 pair.
*808 struts, inc spring, brakes etc. $10 pair.
*929 steering box and column. $10.
*929 brake boosters. $5 each.
*929 diff, drum to drum, 3.9 ratio. $20.
*Assorted 3.7 and 3.9 diff centres. $10 each.
*Complete, uncut 929 / RX-4 wiring loom. $5. (and thank you for not pointing out that it is actually electrical, not mechanical...:)).

Interior stuff
*Good maroon RX-5 seats, front and rear. Will fit 929/RX-4. $40 lot.
*RX-4 / RX-5 tacho instrument cluster. $20 each.
*Dorky old race seats. Ex-Cody Crocker(!). Great for basher / buggy. $30 each.
*Complete 929 sedan dash. $5

Panels and stuff
*Capella driver's door. $20
*Capella rear passenger side door. $20.
*Pointy nose Capella bonnet. $40.
*Pointy nose Capella grill, head-light surrounds. $15 the lot.
*Capella boot-lid. $20.
*Pointy nose Capella passenger's side guard. $30.

*1300 wagon tail-gate. $5.

*RX-5 panels - at least one of everything. $10 each for good bits, $5 each for not-perfect bits.

*RX-4 coupe tail-lights. $40 set.
*RX-4 coupe rear beaver garnish. Was polished (will come back up easily). $30.

*Savanna badges. PERFECT condition. $40 each.
*"Super Deluxe" RX-3 coupe rear window badges. $10 pair.

*808 wagon rear doors. $25 each.
*RX-3 front guards. Not perfect, but not stuffed, either. $20 each.
*808 round head-light nose cone. dented apron, otherwise perfect. $15.
*808 square tail-lights. $5 each.
*808 "evil eye" tail-lights. $5 each.
*RX-3 12A front bumper bar. Slight bend (fixable). $20.
*808 round head-light grilles. $5 each.
*808 square head-light grilles. $5 each.


Big discounts for bulk buys.... :). These bits are in good condition - things like the panels AREN'T full of rust/bog - I'd have thrown them out already if they were... That's not to say that they're 100% immaculate either, but...

Nathan.
02 62598762
In Canberra.

[Beavis]

Spac: I'll take the RX-4 loom! And tacho cluster.. I'll PM you.

[buzz]

Hi Spac,
I'm after a set of 13b rx4 rear drums for the 1300 - in your infinite Mazda wisdom, are the 929 drums the same as the rx4 ones?

Also, I'll take a pair of rotors off your hands too.

Mark

[mr808]

This is too good to be true!!!!!

Spac i am interested in the following:

808 nosecone+headlight grille
Possibly one of the twin dizzies
Do 929 front brakes fit an 808? If so i'm interested!
And anything else that catches my eye!

I'll come with a fat wad of cash!!!!!
Seeya
:)

[MrBridge]

Gee,you got some stuff there!
Let us know if you have anything left around Summernats time:p

[Daveee]

Spac, i tried calling tonight! re: rally stuff, engaged both times.
Old man could be interested in the s2 rx7 flywheel, couple of rx3 front guards and 808 round headlight nose cone.

[exellerant]

damn u why arent you in adelaide u wouldve sold the 3 engines and some wheels. shit happens i guess
l8r all
alex

[the bucket]

WHEELS
4x Cheviot 13x6 four spoke alloys 4x110 pattern. $50 the set.
4x Mazda S1 RX-7 wheels 4x110 pattern, 2 good tyres. Excellant condition. $50 the set


Do you have any pics on these
and do you know if they will fit a 78 323
also would you be willing to ship to North QLD

Thanks

[wlfpac]

Check your PMs please

Rob

[RealizE]

For ****s sake Spac - post all this a week after i was down at your place ! bloody sydney to canberra drives :D

Whats the stud pattern on the weber manifold - will it fit a DGV?

[Eeyore]

gday buddy - wow you have a lineup of stuff there

do you have the plastic strip that goes along the front of a pointy nose capella bonnet? and the clips that go with it - i really need one of these!

ill get back to you about the actual bonnet and front guard too - may be very interested

[Spac]

Eeyore. I've got one, and its metal. No idea of condition though. Will have a look and get back to you. Clips must be there, but I don't know how / if they come off without damaging them - I'll check that too.

Realize. You didn't ask! Manifold is for DCOE side-draft carb, so no.

Wlfpac. Checked, and reply sent.

Bucket man. No pics. Do a search on the web and you'll see what the Mazda wheels look like, the Cheviots are a pretty common old-style alloy. 4 straight spokes, each about 50mm wide, pretend bolt heads around the outside, and each spoke has funny "^" type patterns in 'em. Will fit a 323 perfectly. Freight will probably kill the price. A turbo and some other stuff i sent to the Gold Coast a couple of years ago cost $18 - these are a fair bit bigger, and a lot heavier (tyres being the real killer). Might be do-able with no tyres.

Daveee, Russ has discovered "the internet " so is hogging the phone line for the whole time he's home - morning, afternoon and night.... I'll call you if I can, but it'll be easier if you ring and leave a message during the day.

Mr808. Nosecone = no problem. Twin dizzy should be OK - someone has already claimed the seized one (but its still for sale until I get the money!:)). 929 struts do fit 808s with a little bit of work (nothing crazy, no money). Call me and we'll organise a time.

Buzz. yes 929=RX-4 WRT brakes. They're not a direct bolt-in fit (you need RWD 626 backing plates), but they do fit and are worthwhile. Rotors are in Wollongong, but can be in Canberra this weekend.

Chris. Cool. No PM yet. :)

[buzz]

Ta Spac,
I've pm'ed as well. Give me a call / email / pm/ smoke signal when you have them and I'll throw some cash at you. (you won't have to dance on the table for it this time ;) )

Mark

[mr808]

Oh shit, i just realised that the nosecone is a round light one!:( You don't have a squarelight one do you spac? Expect a PM from me;)
Bill

[glenn]

Hi Spac

The efi inlet manifold would be just the thing for my 1500. Does it still have the throttle body? Whats it off, matbe a MA 929?

Glenn

[mr808]

Spac are those T/D rotor housings shit or are they pretty useable? If they are good, i might try and grab them and possibly the rotors too if they are still there!
Cheers,
Bill

[AVENGE]

Spac, put my name on the RX-5 rims please. I will take the stock ones and the neales ones, thanks.

[Spac]

Avenge. Shouldn't be a problem. The Neales are out at Braidwood, so I'll have to go get 'em, but not biggie. How many stockies do you want?

Bill, rotor housings are good. Twin dizzy ones hardly ever die, 'cause they've got carbon apex seals ex-factory. I do have a square head-light one, but its pretty rough. You want it, you can have it ($0). But I'll have to take it off my car first:). I'll answer your questions then, if its cool (too lazy to type:)).

Glenn, yep, it has TB. I'm almost certain that it has all of the sensors too, but don't hold me to that... Its ex-MA import.

Buzz, will call you this afternoon. That way you and Mr808 can come 'round and we can talk shit, and stop me getting anything done on the rally car... :):).

[glenn]

Spac, Ill take that efi manifold. I might also take the S1 electronic dissy. How much for both. Can you COD it to Ballarat.

Thanks
Glenn

[mr808]

Cheers Spac,
is it alright if i come around with some money and just grab what i want (presuming it isn't already taken)? Don't worry you will have plenty of questions to answer!:D I will come out with buzz (if i recover from the party the night before!:) )
Cheers,
Bill

[AVENGE]

Spac just 2 stockies will be fine thanks. I will ring u later as a friend lives at Braidwood.

Would you have any springs for RX-5s by any chance?
Or a bonnet?

Thanks

[Spac]

Avenge. All good. Springs galore - Some big beefy rears that are probably too high for a road car, one lowered rear K-mac (other one broke...), a pair of front lowered K-Macs. And probably more I can't think of right now. I've also got things like Konis for the rear and rear sway bar and stuff like that, that you may be interested in - nobody else ever has been, but you might be...:)

Bonnets - I have a few under the house. I know one is only OK, but I think the other one is very good.

Mr808. Yeah, come on over, with or without Buzz. :) Sunday? - I'll be down at Batemans on Saturday.

Glenn, $60 + freight. We both know the prices are good enough...:). Call me and we'll organise COD. :)

[Ian]

Spac,

Please e-mail me ian.k.bridge@team.telstra.com I'll take 2 Savana badges straight away.

Ian :D

[Daveee]

So...

[nilezy]

*S2 RX-7 flywheel (lightest factory type). $10.
*12A 6-port motor. Low compression, no sump. $50.
3x 14x6 Kidney / Jellybean alloys, 4x120 pattern, no tyres, $10 each

Hey Spac.

I'm very interested in this stuff. Plus i'm also interested in a 12A end plate, possibly one which I could use to put a motor back together, as is, or one which would require only a minor machine. Are any of the end plates around that mark??

If any of the other stuff is still available, then, could you find out how much freighting it all up to Brisbane would cost, and then send me your bank details, so I can transfer money ASAP.

Cheers Nilezy.

[glenn]

Spac , Ill take the efi manifold and dissy. Email me and I will give you my Address for COD.

Glenn

glennandsharm@bigpond.com

[Daveee]

I'll give u a call spac

[Daveee]

*bump*

[Eeyore]

how did you go with that point nose bonnet strip Spac? still interested, not sure how much you want or how to get it up here though...

also how about that seized 12A twin dizzy? has it gone yet? how complete is the other one you have?

[mondo2000]

If Chris dies or gets hit by a truck I'll take the RX-4 loom and taco cluster :)

The RX-5 seats - are they vinyl?

The RX-4 beaver garnish (used when eating beavers??) thing...is it straight without ripped bolt holes? If so I may be interested. These things seem to be made out of the pre-cursor to alfoil.

If I'm getting other stuff I might get the RX-4 coupe tail lights as well.

[Eeyore]

bump...? u there Spac? :)

[mr808]

Originally posted by Eeyore
bump...? u there Spac? :)

Unlikely!!!:D :D :D

[Spac]

Yeah, I f1@ked up and forgot to look at the bonnet last night, so I thought I'd get my shite together before posting again... Poor performance I know... :o
I should also mention that I have "some shit" going at at home lately, and I apologise for being a bit slack with getting on top of things.

Price will be cheap - probably not enough to cover my time wrapping it up...:)

The other 12A TD is a complete bare block. No sump, no oil-pick up, no water pump (ask nicely and I'll give you one - if I can find one), and no pulleys (makes it damn hard to turn over, which is why condition is unknown).

Seized one is still cluttering up my garage.

Tacho clusters - I have a couple, so you can both have one :).

Seats are velour. Bottom part of rear seat is a bit torn (don't know how or when that happened), top of rear seat is a bit faded, Driver's front seat has a small tear where the handle screws on. Otherwise no faults that I can remember / see where they are ATM...

Beaver garnish (use some parsley to make it look nice) is good - don't recall any damage beyond the usual little dents and stuff, but I'll double check tonight.

[S@ilOR]

spac, wat car did the 4 barrel came out of? if its a rx7 s2/3 ill take providing its in reasonable condition

cheers

[Daveee]

*bump*

[Eeyore]

ok Spac - i would be interested in the following after some thought;

*both complete 929 stuts
*929 diff (is this the same equivilent as an rx4 diff)
*rx4/929 wiring loom
*still that bonnet strip for a pointy nose capella

any of that still available? shiping costs - any idea? thanks

[gjrotor]

I'll take the 1300 wagon tailgate
If its clean?

[mr808]

Oi Eeyore!!! thems 929 struts and 929 diff are mine!!!:) I just gotta get round to Spacs place to pick em' up! I keep forgeting to tell Spac though....:D

[Eeyore]

geez sorry man i havent looked at the thread in a bit... bugger... Spac can you get any more of the same? It looks like i will be needing them very soon...

[mr808]

nah that's cool Eeyore, it was actually in another thread that i asked for them. They won't be hard to get though...just go down to the wreckers mate! :)

[gti_92]

hey spac i would like :

RX-3 front guards. Not perfect, but not stuffed, either. $20 each.
*808 round head-light nose cone. dented apron, otherwise perfect. $15.
*808 square tail-lights. $5 each.
*808 "evil eye" tail-lights. $5 each.
*RX-3 12A front bumper bar. Slight bend (fixable). $20.
*808 round head-light grilles. $5 each.
also round headlight 808 grill sorround!

my phone number is 0438855589

or danielbrand83@hotmail.com

hold them i want them all

cheers and thanx

[gti_92]

hey spac is that rx2 unstarted project car still 4 sale ??

[WheresMy20B]

Any chance that you might have a Alternator for a 12A?

[Daveee]

I have no doubt he does!
I will tell him to get on here and answer some questions!

[tuff808]

hey spac i would like :


*808 square tail-lights. $5 each.
*808 "evil eye" tail-lights. $5 each.
*808 round head-light grilles. $5 each.
also round headlight 808 grill sorround!

also do u have a black dash board with mph on it? how bout the black strips that go round the door jams? also any other thing 4 an 808 4 door i would be highly interested in!

my phone number is 0438855589

or danielbrand83@hotmail.com

hold them i want them all

cheers and thanx:wtf:

[WheresMy20B]

You wouldnt happen to have a Starter Motor for a
RX7 12A layn about would ya ¿

[wog 007]

put my name on the koni suspension please
post message me or just email me asap im in syd will do cod for those konis if you could reply me asap
thanks,im interested in your savanna badges so put my name on those! thanks heaps
my email is badwog@ihug.com.au

[HoonBoy]

Guys there is a phone number on the first post, you could try ringing that if you want a quick response.

Spac doesnt actually abuse you when you ring, he was very plesant to me... (although that was a couple of years ago...:rolleyes: )

[gdingy]

Piston motor Stuff
*EFI intake manifold, no injectors or fuel rail, suits NA/VC/MA. $10.
*Single Weber manifold to suit NA/VC/MA. $50.


I would LOVE to purchase those 2 items if they are available. I am located in the states not sure where you are.

Thanks

[Mr Ed]

We're in the past, sorry. These parts were likely gone 8-9 years before your time.

[ahk068]

I would LOVE to purchase those 2 items if they are available. I am located in the states not sure where you are.

Thanks


Worst 1st post ever, congratulations

[gdingy]

Worst 1st post ever, congratulations

Why?

The user is still a regular on this board and if he is anything like me I don't throw anything out. :owned:

[bigmuz]

if he is anything like me

A fuckwit?