more disks!

[simon010]

i have 10.5" (266.7mm) dia vented disks on an old fiat. they are mounted via hats with a 5.5" pcd with 6 throu bolts.

the disks have slots, and have lots of heat cracks . . . . . . .. . .

question

does anyone know if a production disk (rather than v expensive ap) could be machined up to suit - in the v old dba catologue i have the following would go v close

magna tm
narvara 4wd fronts
pathfrinder 720 4wd fronts

does anyone out there know the internal dia of any of these disks (ie is there enogh meat to machine the std hub off and mount a bell on it)

regards

simon

[dbasteve]

Originally posted by simon010
i have 10.5" (266.7mm) dia vented disks on an old fiat. they are mounted via hats with a 5.5" pcd with 6 throu bolts.

the disks have slots, and have lots of heat cracks . . . . . . .. . .

question

does anyone know if a production disk (rather than v expensive ap) could be machined up to suit - in the v old dba catologue i have the following would go v close

magna tm
narvara 4wd fronts
pathfrinder 720 4wd fronts

does anyone out there know the internal dia of any of these disks (ie is there enogh meat to machine the std hub off and mount a bell on it)


regards

simon

Simon,
How thick are your discs? ( TM = 24mm)
We have quite a few unlisted flat discs for this purpose.

[simon010]

steve

supposidly they are 20.7mm thick, AP p/n is CP4136-48

if you guys have something suitable that would solve a lot of problems!

i will contact you off list

thanks and regards

simon