Microtech Installation on a Liberty RS!

[HIS-12C]

My mate has a Liberty Rs Turbo who wants to put a Microtech in Asap.
Everything is ready to go!
Anyone out there who knows who can install it for him ASAP???

THANKS!

[psi999]

TRP

[Forg]

Is it totally inappropriate to say "Ew" at this point?

[Karupt]

HIS-12C,

Is that the charcoal RS your mate owns... ??

why's he going with microtech... ??

Tony Rigoli is the man to deal with when it comes to them..

Vince kinda turned me away when I asked about microtech... so its EMS for me..

[HIS-12C]

Yes, i know Microtech hasnt got a real good name, but he has already got the computer!!

Karupt,
Yeh dude, its my mates charchoal Liberty.
He wants the computer desperately installed before the weekend.

He has tried THE RIGOLI BOYS, the wait is too long and everyone is pritty tied up at the moment.:rolleyes: :rolleyes:

But i think he just found some guy who will install it then it will be straight to (matt) HITMAN Tuning. & ready for the weekend!!
Me waits for competition!:O :O
Microtech hasnt let me down so far, cant be that bad!!;)

Maybe its just Rotarys are better than Subarus?? (Just Stirring you Karupt):D :D

[Karupt]

If you find someone to do it and for cheap let me know... :)

Heck I'd be happy with any sort of computer.. the RS ecu can't run my engine right..

I'll give you some competition biatch :)

[Cplus]

Errr, shouldn't this be in a tech section??

God it pisses me off when people post here for better exposure... :rolleyes:

[AKA180]

microtech for the god squad

[HIS-12C]

Originally posted by Karupt
If you find someone to do it and for cheap let me know... :)

Heck I'd be happy with any sort of computer.. the RS ecu can't run my engine right..

I'll give you some competition biatch :)

Yeh, i will let you know dude!!:)

You give me some competition.... mmm maybe after you destroy a box?? haha, ;) Nah, my friend will be very keen to see the difference between both Liberty's!!
After he puts this computer in, i dont think his box is going to last, have you had any problems yet??

[Karupt]

His-12c...

My box being an Sti box seems to be as tough as shit... plus when I launch I'd rather slip the clutch to get off the line then to drop all hell out of and blow a gearbox... I can get a wicked launch off the line without any thud of gearbox/driveline.. just the smell of clutch is a killer :)


I'll run you're mate... but only 0-100 :) my car starts running out of revs above 100, due to the stupid ultra close ratio box..
4000rpm @ 110kmh in 5th just aint right !

[HIS-12C]

Originally posted by Cplus
Errr, shouldn't this be in a tech section??

God it pisses me off when people post here for better exposure... :rolleyes:

Sorry to hurt your feelings mate!!:rolleyes: :rolleyes:
But i was in a rush, and if it was exposure that i was after, it worked, because i needed answers in a hurry!
:gay:

AKA-180..... Microtech works pritty good in rotaries, dare to test me out???:D :D

[Karupt]

Microtech works a wonder on rotaries...

Vlad from rotorworx wants me to do mt8 on my car..

He said he'd give me it at cost or whatever... then asked me if I can read, and solder, I said yes.. so all of a sudden I was doing the install, he said its easy.. but since he's in melb and I'm here.. he can't tune it for me.. otherwise it'd be the way to go..

But dude let me know how you go.. I wanna go for a cruise in the car and see what it goes like when its all done.. and I might go the microtech route.

[HIS-12C]

Yeh, The STI box sounds good, but dont know about the rev/kmh factor, sounds to wrong!!
How much are the STi box's worth/easy to get?? (you never know, my mate might blow one in the near future)

Yeh, apparently Microtechs are a peice of cake to install, but i still wouldnt do it.:rolleyes:

And hopefully alot of cars will be out this weekend (esp on fri nite)
Thats why he is in a rush to get it done. Friday Night, We are organising........Competiton Awaits.;) ;)
Might see you out, You keen in coming??

[Karupt]

Where are you guys headed ?

And where have you found to have it installed ?

[HIS-12C]

An old mate of ours is installing it tonight, he is a mechanic and nothing should go wrong. (hopefully):D

Me and my mates will be heading out for a drive on friday night, maybe to the city e.t.c then after we will be meeting up with some other cars in the local area and take it from there!;) ;)
I dont wana say too much, but it will be a 5-10 min drive from where i saw you at gioia!!;) ;)
Thats if the whether holds up!!

[Karupt]

aiiiiiight no worries.. :)

Where abouts is the guy installing it... at .. I wouldn't mind watching it get installed for some pointers... I gotta take a mate to his formal tonight at La Montage... then after that not sure what I'm doing :)

PM me

[AKA180]

Originally posted by HIS-12C
Sorry to hurt your feelings mate!!:rolleyes: :rolleyes:
But i was in a rush, and if it was exposure that i was after, it worked, because i needed answers in a hurry!
:gay:

AKA-180..... Microtech works pritty good in rotaries, dare to test me out???:D :D

give me a week or two and ill have my computer in and ill be ready to test you out

now you and the god squad can go down to your local drag strip
near your favourite beach and clean all the sand off the street
so you have know excuses why you got :owned: :owned: :owned: :owned: :D :D :D :D

[HIS-12C]

AKA-180, you dont have a problem with the sand because you get all the traction you need.
Weight sometimes helps in a car>>.:knock: :knock:

And why would i want a :gay: 180sx on my victim list???

VICTIMS:-
S15 :owned:
TT Supra :owned:
Liberty Rs :owned:
GSR :owned:
WRX :owned:
A :gay: 180sx..... SOON TO BE :owned:

:rotflol: :lol:

[Karupt]

HIS12C,

How did the install go dude ?

Any progress news ?

[HIS-12C]

KARUPT, i knew something would go wrong,
My mate in the liberty got told that it would be finished in a couple of hours, but when they started installing it, it was going to take longer to do.
So they didnt attempt it, and will probably be installed next week or something.....:( :(
Dont know yet!

[Karupt]

That sucks man... :/

I'm looking at buying EMS and giving it a go installing it myself then getting it tuned professionally..

Sick of my constant ecu problems...

[10sec rx7]

If its anything like a nissan they will be there for a while if they havent done one before!
just check what actually runs the dash/thermo fans etc before you cut out all the factory wires!!