race r32 gtr slapp up

[fatz]

separating my race car from my road car build up as its confusing

plan was to build a 3e production car to enter in combined touring on a budget of fuck all(mainly cause i had alot of spare parts in my shed)
paid stuff all for a registrable shell(cheap as because it had the usual rust)
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/day%20one/pickup.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/day%20one/2.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/day%20one/3.jpg
basically like all race cars we stripped the shit out of it
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/day%20two/interiorgone.jpg
jenna flogged anything decent and stuck it in her road car
more stripping
removed most of the crap that was not needed, put alloy bushes in the rear cradle, hicas clock kit and minor mods to the front to get 4 degrees of camber
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/froint%20end/PC270033.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/04012010664.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/04012010665.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/04012010666.jpg

sent it off for a basic cage
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/Picture004.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/Picture005.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/Picture003.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/Picture002.jpg
cage painting is a SK of a job
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/P2130590.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/gtr%20peter/2010/P2130589.jpg
some new brakes(brembo on the rear)
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/froint%20end/PC270034.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/froint%20end/PC270035.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/froint%20end/PC270036.jpg
first attempt at oil cooler placement also radiator
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/oilcoller.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/pete%20gtr/backtogether.jpg
dash version one
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs784.ash1/167478_10150119482363126_643828125_7548719_1688251 _n.jpg
shlapped it all together with a frontcut motor form a "reputable sydney import joint"
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_8465.jpg
sure enough the engine that was "fine" and "if it not we will look after you" turned out to have no oil pressure.... and they looked after me by telling me to get stuffed
dead motor out(race gtr owners are very good at R&R.. so i am told)
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_0459.jpg
so anyway i bought a spare wrecker motor from japan and slapped it in
after chasing my tail for a week i discovered the intake manifold gasket need to be replaced (prick of a job)
the day before a 6 hour regularity and it was finally tuned
252rwkw at 13psi...252.5k or exactly on cock power
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_0517.jpg
and finally the race car had its first outing
couple of issues (the bad)
the accelerator pedal fell off(looks like i didnt tighten those bolts)
if revved over 6k the breather would oil up the rear turbo and go through the engine and out the exhaust(definatley needs a catch can)
car would only do 8 laps before fuel surge (ghetto mod to fuel pump got it across the line at the track)
single peice tail shaft is not balanced i think which is quite annoying (turns out i just didnt tighten up the bolts on the flange at the back... that could have been very nasty)
fire extinguisher tried to escape a few times
once it rained the window fogged up like a bitch
the good
car went hard all weekend even though we could only rev her to 6k
stoptech brakes were awesome
for a first shakedown a 1:10.1 on 3 year old ku36's and only reving to 6k with heavy traffic is fine
anyway enough bullshit here are some pics
http://i236.photobucket.com/albums/ff9/fatzgtsr/jenna.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/yard.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/grid.jpg
i got a tad excited as i had a week beofre going os for 3 months so i slapped on some "n1" turbos, catch cans, re-did the dash, kill switch, oil cooler, surge tank and had it re-tuned in a week. now with 309rwkw at 17psi and shit not falling off i took it out to a circuit club day.... did one lap and oil everywhere
turned out to be a cracked oil line (must have happened when i swapped the turbos) so back home
http://www.skylinesaustralia.com/forums/uploads/monthly_07_2011/post-20349-0-86702900-1311157350_thumb.jpg
http://www.skylinesaustralia.com/forums/uploads/monthly_07_2011/post-20349-0-11122600-1311157498_thumb.jpg
dash version 2
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_0711.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_0715.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_0712.jpg
also lowered the seat so they my head was not making love to the role bar
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_0710.jpg
anyway as it stands now its ready to go once i getback from os i would like a high 1.07 at wakefield and a 47 at ec on ku36 then ill get some proper semis and enter it into the combined touring next year

now were up to date future plans
1st change the oil
2nd thrash it hard, replace every bush as they are fucked, new sway bars possibly, possibly new struts as the one in it are just some hks shit i found in the shed, get it corner weighted, and install the front and rear lsd i have in my shed

i think as it stands its cost about 15k
20k is you count the spare 33 motor inthe shed and the rebuild motor in my front room that are ready to go in once the wrecker motor blows up

[fatz]

taking this shit heap out to the skid pan to tear up some rear rubber

[Rhys]

Nugget

[itsnotagsr]

CSH. Love your work pete

[monk_13]

Dyno printout clearly shows the need for more cow bell.

What sort of dollar figure for the cage? Currently tossing up build a track only GTR instead of playing further with my Z33.

[fatz]

didnt pay for the cage

i swapped it for a 1000hp turbo kit out of my zed

but same cage normally around the 3.5k mark i assume

[e30guy]

Nice work, please gusset the seat mounts a bit though :p

Are you a circuit club regular? Might see you round

[fatz]

gusset... check!

[evil_weevil]

going to look into the MRA series Pete?

Or you still thinking of the WANKR series :D

[333pg333]

That's great. Shames me to think how much I've thrown in the toilet over the years. Even $30k into that car would be pretty swift and it's still cheap as. Good work.

[RNGTR]

Nice. Love a good cheap 32 track slut.

[WildZero]

Good work Pete! Thread needs more skids videos ;)

[spiller]

very cool, excellent write up. Question (and might seem odd), why didnt you bother with alloy bushes for the front subframe?

[fatz]

Nice work, please gusset the seat mounts a bit though :p

Are you a circuit club regular? Might see you round

actually i am going out for the ec twilight on Thursday( aiming for 1:48 with the same old shit ku36's)

in other news the car was aligned today and turns out its full wet weight is 1420kg (full tank)

stocker with the gust stripped out and no passenger seat

downside is i weigh 140kgs so its a heavy bitch when i am in it

hopefully i can strip another 100kg out

[fatz]

going to look into the MRA series Pete?

Or you still thinking of the WANKR series :D

yup mra + irace next year and possily targa high country

[fatz]

very cool, excellent write up. Question (and might seem odd), why didnt you bother with alloy bushes for the front subframe?
front subframe is solid mounted standard

[spiller]

1420kg and fully stripped out, who said GT-Rs were light, but 4wd will do that. id pull as much shit out of the engine bay as possible, good way to reduce weight in the right spot.

[GTREA]

Mine came in at 1540kgs minus HICAS and Driver....(im 80kg)

But plus some very nice Plush pile carpet.....as it helps to have a Luxurious interior when you track a car.

[fatz]

yea i must say i am happy with 1420 she is a heavy bitch still (but i really have not tried to rip shit out its just a basic strip)

will try and reduce more weight when i pretend to get serious, so proably 2015 lol

would be able to pull another 100kg out if i tried but i am lazy

[80DGY]

.as it helps to have a Luxurious interior when you track a car.

http://t0.gstatic.com/images?q=tbn:ANd9GcSghRRBp_7WIhg-O_yYnuZjKXfsjprTSrT7Q266WIaKC4zAJh9f-w

[fatz]

man i am excited

pissing down rain + ec full circuit

this is going to be awesome if the car holds together

best part is 70% of muppets wont turn up cause its raining!

yea baby!

[evil_weevil]

yup mra + irace next year and possily targa high country

Good man. First round is Jan 29th I think.

[fatz]

well just when i said its been cheep to throw together

looks like the cracked oil feed line= flogged out seal on the rear turbo

anyway 3 laps and white oil out the exhuast!

meatballed

shitkunt needs two new turbos now

might whack on some spare n1's i have

100 bux a lap= good value

[niggerjewz]

It broke because GTRs are GAY - R31's for LIFEEEEEEEEEEEEEEE

I bet if you raced in a GTS1 you'd have done 100 laps!

[fatz]

last time i took a stock gts to the track i did about 100 laps

stock cars= reliable fun

modified car= minor issues fuck you in the ear hole with no lube, mainly dude to shoddy work undertaken by me

i have 30 days till the next event so ill will fork another couple of grand on the shit heap and if it doesnt work ill burn the kunt

[e30guy]

So I did see you there? Was going to come say hi but was struggling with my own problems and then you had left. Was a shitty day allround I think. Lift pump died in my car.

[fatz]

yea was a flop for me

i came from work early ( jenna brought the car on the trailer from home)

she tuned up at 5pm then realised she didnt bring the key...lol

drove home and was back around 645

did three laps oil seal gone so packed up left and drunk half a bottle of scotch and call the car cunt a few time

[e30guy]

ah what a shit afternoon! We had a boostline fall off in the second session (30psi, yeeha) and the intermitent cutting out popped up. eventually this became more and more constant. Fuel Pump has high resistance and the wiring is also pretty dodge.

I'm glad I got more than 3 laps out of it though!

[fatz]

new fuckenwooshkunts turn up tomorrow

back on the road for a track day on the 17th of december

[evil_weevil]

get this shit heap ready for MRA

[fatz]

yea she will be out there just need some more safety shit

[fatz]

rant time

my engine room (front bed room) is now starting to get baby shit in it

doesn't this kid know who i am

get your own room

farken!

[evil_weevil]

congrats!!
Im in the same boat. less money on race car more money for lil weevil.

[Ke26 Wagon]

hurry up and build your shed fatz!!

before you know it the little one's shit will take over the house

[fatz]

this will be out saturday hopefully for a trouble free day of thrashing... touch wood!

[fatz]

well

ten fucken years of thrashing gtrs at race tracks

never had a drama

as soon as i say i have "a race car"

the kunt keeps blowing up on me

leak down test confirms its not the turbos and either a craacked ring land or piston in 5 and 6

shitkunt arshole...... have to consult with my engine tree and swap out the farken motor!

did i mention i might burn the cunt

[spiller]

Put a 2J in it

[fatz]

having watched some of the lads play with a 2jz last night

i shal definately stick to the rb's

2jz great drag motor
shit for circuit

[fatz]

santa also turned up early for 2012 race season

http://i236.photobucket.com/albums/ff9/fatzgtsr/santa2.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/santa1.jpg

[fatz]

engine coming out tomorrow

hopefully smooth sailing

slab of bourbon and cola on standby

[fatz]

pull the engine out tomorrow to see whats wrong

will get a 9 litre sump as the same time as one of the spare motors goes in

race car got new booties

bought these ages ago
around 6kg a corner less than the rotor rims and rubber
reminds me of the old gibbo cars

panasport forged single piece.... nice and light weight
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_1138.jpg

http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_1136.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_1137.jpg

[WildZero]

Oh lawd that car trailer of yours gets a workout, what have you bought now?
Liking the new rims, clean & purposeful. ;)

[fatz]

trailer=shell ready to go off to the recyclers

[evil_weevil]

clean your boot.

[fatz]

race cars get washed only if everything is right before a race

i have never washed it!

[fatz]

well after parking this where i could not see it for a few months... i need a hit at the track

time to dust it off,get a new engine in it and take it to the track

[evil_weevil]

Im doing the southern sporting/WRX club sprint on the 11th March at Wakie.

do it.

[fatz]

engine will be in by then but probably not tuned

have a list as long as my arm i would like to do

eg haltek+ tune

skidz

[fatz]

stupid rain farken

will have the engine out tomorrow night

[fatz]

sump is back
http://i236.photobucket.com/albums/ff9/fatzgtsr/photo3.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/photo2.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/photo1.jpg

[Momus]

Drain bolt big enough?

[Alex.P]

Big sumps are good. I like big sumps. Big drain plugs ftw. I like big drain plugs.
Obviously the rain has got to me....

[fatz]

i like a hole big enough to finger

[fatz]

engines in


fingers crossed for startup

always stressfull on used motors

[e30guy]

good luck with it mate!

[itsnotagsr]

How quick can you change them over now pete?

[fatz]

4 hours out

4 hours in

swappinga all the externals takes about 8 hours though which is a prick

drinking excessivly also doubles those times

[fatz]

such a great feeling when a new engine kicks on the first go and idles perfectly

[fatz]

dropped by dale's ( parked my 4wd over two spaces out the front)

haltek ps2000 ordered + oil pressure sensor + install racepak dash ( to pull bitches)

fingers cross the car survives and makes it to the dyno so i can blow it up on sunday at wakefile

[10sec rx7]

its not a PS2000 its a platinum pro plug in.. the pros have a lot more features than the PS2000 :)

[fatz]

Yea whatever the fancy one is

If it survives the weekend I'll even take it to the strip for some quarter mile action

I predict an 11 the a lack of oil pressure in true Gtr style

[10sec rx7]

sounds good!

[Alex.P]

What is in at Wakefield?

[fatz]

Sau track day this weekend

Shake down

[fatz]

menatal note..... don't build cars when your on the cans

turns out the majority of nuts were quite loose

lol

new checklist starts with tighten shit!

[fatz]

on the dyno ladies

hopefully no clutch slip and the rods stay in the engine

[10sec rx7]

got to track a vacuum leak in the morning.. hopefully i can find it or its a stuck idle motor or something like that..
your speed sensor is not working either so cant put the gear indicator on the dash :(

will call you in the morning

[fatz]

cool ill keep the phone on

[fatz]

might be a inlet manifold gasket?

they like to fall appart

hopefully just a hose

[10sec rx7]

yeh could be, ill check all the hoses first as i dont fancy pulling the intake off lol

[fatz]

apparently the racepak dash makes the interior all flashy and shit!

[10sec rx7]

340rwkw on 22.5psi.. which is as low as the boost will go...

pulled a little back to 327rwkw as the injectors are maxing out and just to be a safe cunt...
dash is porn..

[10sec rx7]

Dash all looking cool and shit

[itsnotagsr]

apparently the racepak dash makes the interior all flashy and shit!
Rice boy!

[spiller]

^^^ dash looks sick! How is it mounted? I have one here ready to go in.

[10sec rx7]

It's bolted to the racepak bracket which is bolted to the dash piece somehow!

[prasac]

i reckon for the money, can't beat the IQ3. they look the best.

it's funny when you ring Motec and tell them you have an IQ3 and not a Motec dash, you usually get the ''has it started playing up yet'' spiel :knock:

who sells the brackets, Haltech?

[10sec rx7]

bla bla bla motec are dirty cause haltech are taking all there sales.. once the platinum pro wire up system is released its going to be a hard market for anyone else to crack and going to leave everything in that price range for dead...

yeh haltech have the brackets,

[fatz]

flashy

should go well around wakefiled on road tyres

lol

thinking elephant on ice

340rwkw is pretty good fucken woosh

[10sec rx7]

yeh get reading on the manual to setup the lap timing !!!

[spiller]

that manual is as useless as tits on a bull. not looking forward to config. when the time comes on mine.

[10sec rx7]

config is the easy part.. i can do that with my eyes closed... but i have NEVER had to use the lap timing function.. this is the first car thats actually had button 1 installed in it.. lol

everything else has button 2 for just switching screens..

from what i sort of figured is you need to push button 1 when going around the track and it will use that point as the timing marker, but im not sure if you need to load a track map onto the memory card first etc.. which should be easy to find for wakefield etc..

[fatz]

fuck need to read something

fuck that ill just have a crack at pressing shit

[10sec rx7]

bottom button changes screen... top button does fuck knows... lol

[Walt Kowalski]

+1 for MRA SuperTT. Good range of cars. Sensible people

[fatz]

yea will be entering MRA

car needs alot of work still but will be ready to party in a few months time

[fatz]

Survived only about 4 sessions

Ic pipe kept on piping off

[10sec rx7]

So motor is ok but the piping sux?

[fatz]

yea just china ic pipes

never had a drama before but never ran 22psi before either

will tidy everything up and get back out there

dale hook me up e85 + fuel pressure sensors and 6 eg's( at least a price so i can consider future wasting money)

[10sec rx7]

Ok I'll work it all out on Monday

[evil_weevil]

Pete,
May 6th is next MRA. Big round too with more classes. wish I could make that one.

[fatz]

Would love to be there and the car will be ready

Sadly the little fatZ is due 5th may so not much hope of making it out

[fatz]

mobile phone picks but you get the idea
tops job by brad
doors
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00008-20120405-1456-1.jpg
only about 1000 times better than what i had
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00008-20120405-1456.jpg
sprayed inside
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00013-20120405-1501.jpg
oil relocator mounted properly
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00009-20120405-1456.jpg
new ic that should make it faster
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00012-20120405-1457.jpg
ic pipes comming to gether
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00011-20120405-1457.jpg
still lots of work to do... eg battery to boot, dry sump ect but comming along
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG00016-20120405-1519.jpg

tops work by brad as usual!

[fatz]

something i have been working on

introducing

Zoe Jasmine Carruthers
2.75kg
50.5cm
born 7pm 18/4/12
proud dad and mum
(only pick i got for now)
http://i236.photobucket.com/albums/ff9/fatzgtsr/dad.jpg

[Rhys]

Thats awesome fatman. Congrats Pete and Jenna.

[rowdytoot]

congrats fatz- dude you look, either suprised, or scared :p

[itsnotagsr]

Congrats mate!

[Ke26 Wagon]

Well done fatz and congrats to jenna.

[e30guy]

Congrats guys, heres to happy and healthy times ahead!

[MRMOPARMAN]

good work mate, hope everything went smoothly.

+1 on weird look.. looks like zoe just just did her first pooh, and you copped a whiff of it :p

[fatz]

yea she has dropped a few already

[fatz]

upgraded to a large ic
battery relocated to the boot
knocked up some custom pipes
old mate wants to polish them
i laughed
work in progress but it will have burst plates welded on, cause it shits me when a pipe blows off
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_4686.jpg
new bov should give it some fucken whoosh(probably will mod this pipe so no joiner though)
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_4685.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_4684.jpg

[fatz]

hopefully should have running car back with the dry sump this wednesday

dale should it be retuned?

have a event on sunday to attend

[fatz]

pos will get there some time
dry sump shit
http://i236.photobucket.com/albums/ff9/fatzgtsr/547694_10150998628938126_643828125_11827196_146812 872_n.jpg

[fatz]

dry sump from profab
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5050.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5051.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5052.jpg
new ic( out of jennas car) and piping as well
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5055.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5060.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5056.jpg
toight
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5061.jpg
off to dales to check the tune is ok tommorow then laps for the birthday friday

tops job by brad at profab
better wash it now that its semi flashy!

[fatz]

http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5070.jpg

http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5071.jpg

[TT]

Cool

[80DGY]

how does one achieve that race look you have there?

[fatz]

Go to goulburn

No pics on track as I drive then baby sit when Jenna drives

[fatz]

So some minor plans for this now seeing as the last track day didn't go so well( blown oil cooler and fuel pump wiring)
Plans are
New brakes (had some poorka 997 sitting around around)
New oil cooler
New breather for dry sump
Rewire the whole car as its dodgy as fuck
New rims to fit brakes
I also have my big 3 litre (tk head) and t51 r which would go well in this
Got dale to hook me up egt sensors, boost control and a wide band kit as well

Going to pull some weight out as well see how that goes then drive it into the ground and fix it again

[bahaimus]

Lucky this is just a slap up build.............

[fatz]

Sounds flashy but it really is just left over parts Taking up space in my shed

I'll put stickers over the rust to spruce the pos up

[fatz]

Well the black voodo curse was fixed by a Nissan oil filter

Now have lots of oil pressure

[fatz]

righto car is ready for dale to re tue with some more toys

hoepfully it survves the 6 hours wakefield day

http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5343.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5341.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5338.jpg
passenger seat to spice thingsup
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_5339.jpg
going to keep running the 3 year old 235 ku36's until it runs a 1.07 at wakefield then ill slap on some 10.5 inch 18's with some decent rubber( mainly cause i am a tight arse)

[fatz]

Down at dales getting a touch up and some more boost

Might even take it to the drags for a laugh

[fatz]

283kw at 18 psi ready to party

[10sec rx7]

with plenty of oil pressure and a data logger that logs and displays lap times :)

[fatz]

Sweet farken:w:

[10sec rx7]

i updated all the dash firmware and stuff so its ready to log 20 channels when the EGT's go in.. Haltech writing the new firmware for the Pro plug in now so it will log anything you want it too :)

PS needs a new fuel reg when the other pump and Eflex get done :)

[fatz]

Sweet now we have lap times Jenna is Going to lose her shit

[fatz]

http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_54521.jpg

[fatz]

Shitkunt of a car is in red mode

Single spinning the entire lap

Ghey

And the farken pwr radiator cap has fucked out.... Lol

So much for buying quality... Cunts

[fatz]

you know when your drunk and you buy stuff
then it turns up after you forgot
well this was a plesent suprise present
people use i-phone for size comparisons i use babys
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_55671.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_55701.jpg
http://i236.photobucket.com/albums/ff9/fatzgtsr/IMG_55721.jpg
this is for the 3 litre motor

[10sec rx7]

fuck nice dude lol

[fatz]

Yea Zoe has expensive taste

[fatz]

well turns out this shitkunt blew a head gasket on the weekend on saturday

15 years of gtr ownership( and thrashing on the track) and this is the first time thats happend to me

ive said it before that i would consider burning the kunt

but like all knobs ill just fix it and blow the next thing up

[fatz]

well after a bottle of wine ive decided to ditch this cursed car( the shell at least)

ill be swapping it over to a registered shell i have sitting around with less rust and less wiring issues

clean slate and slap all the good shit in, best part is it will be riegistered so i can test drive the pos an iron out any buggs prior wasting cash on a track day

[fatz]

might start a new thread as well an let this one die in the arse

[RX22NV]

Geez Pete, you don't have a lot of time

[MRMOPARMAN]

i shall do you a favor and take that damned cursed shell away for you and i wont even charge you for it :D

[fatz]

Dan just swapping the brakes, suspension, race seatnand harness for marulan

Will be fine for a days thrashing

Shell will be for sale if someone wants a log booked shell

[fatz]

lol

just did a list of what i would have to do to swap it over to a new car

think i might just slap a new wiring loom(full body) in the pos and see if that fixes it

[Mad31]

lol

[fatz]

farken pos

has been parked on my car trailer for 2 weeks now

still considering burning the pos

[fatz]

Turns out I only have 5 weeks to the sky ants so I have started fixing. This pos

Updates of gayness to cum

[fatz]

On stands and starting to sort the wiring fuckup

[EVL]

http://orangelic.org/wp-content/uploads/2012/06/tumbleweed.jpg

[fatz]

engine is almost out

found metal shaving in the ic pipes, looks like the rear turbo has eaten a few things and spread the love

[Terribleone]

You are a very patient man!

[fatz]

Yea I have a few gtrs

One always runs

So I am happy

Would be nice to get a season out of it after I fix it though