Page 1 of 2 12 LastLast
Results 1 to 30 of 32

Thread: FS 1994 Diesel Pajero

  1. 12-03-11, 10:46 PM #1
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325

    FS 1994 Diesel Pajero

    Time to sell the trusty white Pajero.
    It's got about 420,000km.
    5-speed manual gearbox.
    Safari snorkel.
    Full-width alloy bullbar.
    Later model alloy wheels, as-is the spare.
    New front tyres, rear tyres lots of tread.
    Heavy-duty tow bar + trailer plug.
    Original useless oil pressure & other centre gauges removed and replaced with good oil pressure, boost, and voltage gauges.
    90/130w headlights.
    Interior, including seats, all in good condition.
    Two heavy-duty batteries with an isolation switch for the 2nd battery.
    Air-conditioning is almost new, works very well.
    New front windscreen.
    Rego until 20/08/2011
    Does a bit better than 10l/100km on the highway, not a lot less when towing a big trailer. I'd guess about 11 - 12l/100km around town. 90 litre tank.
    Nurburgring sticker on the back. (has not set a time at the 'Ring though)
    $4,000.

    Got spare engine with only ~80,000km for another $2,000 but fuel pump from it is on the car already.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: pajero1.jpg  Views: 27  Size: 188.0 KB  ID: 46953   Click image for larger version.  Name: pajero2.jpg  Views: 24  Size: 227.1 KB  ID: 46954  
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  2. 14-03-11, 04:52 PM #2
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Also got a complete set of four wheels like the ones in the photos.
    $200.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  3. 14-03-11, 10:58 PM #3
    uuheels
    uuheels is offline
    Registered User
    Join Date
    Jan 2008
    Location
    Au
    Posts
    268
    Quote Originally Posted by Billzilla View Post
    Also got a complete set of four wheels like the ones in the photos.
    $200.
    What size are they Bill? 15's I guess?
    Pics?
    Reply With Quote Reply With Quote
  4. 14-03-11, 11:05 PM #4
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Quote Originally Posted by uuheels View Post
    What size are they Bill? 15's I guess?
    Pics?
    Yeah they're 15's and they look the same as the ones on the car. 8" wide I think.
    I can take another photo of them if you like.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  5. 19-03-11, 03:10 PM #5
    DR GTR
    DR GTR is offline
    Rb26dett DR GTR's Avatar
    Join Date
    Mar 2003
    Location
    Campbelltown
    Posts
    547
    Keen on a swap Bill?
    Reply With Quote Reply With Quote
  6. 19-03-11, 04:06 PM #6
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Nope, already got a new Pajero. What would you swap it for though?
    uuheels sorry I keep forgetting to measure the wheels, will do soon.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  7. 19-03-11, 04:11 PM #7
    Howard Jones
    Howard Jones is offline
    no one ever, is to blame Howard Jones's Avatar
    Join Date
    Jul 2005
    Location
    brisbane
    Posts
    2,336
    Quote Originally Posted by Billzilla View Post
    Nope, already got a new Pajero. What would you swap it for though?
    uuheels sorry I keep forgetting to measure the wheels, will do soon.
    why would you need to measure the rims? just read whats written on the rubber
    Reply With Quote Reply With Quote
  8. 19-03-11, 04:22 PM #8
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Quote Originally Posted by Sebastian Vettel View Post
    why would you need to measure the rims? just read whats written on the rubber
    Because he wants to buy the wheels, not the tyres.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  9. 19-03-11, 04:25 PM #9
    Fondles
    Guest
    Quote Originally Posted by Billzilla View Post
    Because he wants to buy the wheels, not the tyres.
    The tyres should have a diameter displayed on them though.
    Reply With Quote Reply With Quote
  10. 19-03-11, 04:26 PM #10
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Quote Originally Posted by Eddie Munster View Post
    The tyres should have a diameter displayed on them though.

    Quote Originally Posted by Billzilla View Post
    Because he wants to buy the wheels, not the tyres.

    .
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  11. 19-03-11, 06:38 PM #11
    DR GTR
    DR GTR is offline
    Rb26dett DR GTR's Avatar
    Join Date
    Mar 2003
    Location
    Campbelltown
    Posts
    547
    Quote Originally Posted by Billzilla View Post
    Nope, already got a new Pajero. What would you swap it for though?
    uuheels sorry I keep forgetting to measure the wheels, will do soon.
    Mate. I need more room for the 3 kids and I could do with a 4wd for camping trips.

    http://www.performanceforums.com/for...php?t=67265447
    Its not a toyota but its still insane Variable Valve timing
    Reply With Quote Reply With Quote
  12. 19-03-11, 06:40 PM #12
    Fondles
    Guest
    lol@Bill, he wants to know if they are 15", no need to measure anything just look at the bloody sidewall of the tyre.
    Reply With Quote Reply With Quote
  13. 19-03-11, 07:13 PM #13
    takai
    takai is offline
    Bannered takai's Avatar
    Join Date
    Dec 2002
    Location
    Melbourne
    Posts
    8,327
    Send a message via ICQ to takai
    I think Bill is planning to measure the width..... of the wheel....
    Chris
    ------
    I cant get no sleep...
    AE86 race car thread is finally up to date | Supposedly i have a new daily project too
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence
    Reply With Quote Reply With Quote
  14. 19-03-11, 07:19 PM #14
    Fondles
    Guest
    Quote Originally Posted by takai View Post
    I think Bill is planning to measure the width..... of the wheel....

    15" x 7JJ, PCD 139.7.
    Reply With Quote Reply With Quote
  15. 19-03-11, 07:47 PM #15
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Quote Originally Posted by DR GTR View Post
    Mate. I need more room for the 3 kids and I could do with a 4wd for camping trips.

    http://www.performanceforums.com/for...php?t=67265447
    Its not a toyota but its still insane Variable Valve timing
    Nah pass thanks, got more than enough cars here.



    Quote Originally Posted by Eddie Munster View Post
    lol@Bill, he wants to know if they are 15", no need to measure anything just look at the bloody sidewall of the tyre.
    He's looking at the WHEELS not the TYRES. Mate it's not confusing.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  16. 19-03-11, 07:52 PM #16
    Fondles
    Guest
    Quote Originally Posted by Billzilla View Post
    He's looking at the WHEELS not the TYRES. Mate it's not confusing.
    Not confusing at all.....................
    Reply With Quote Reply With Quote
  17. 19-03-11, 08:08 PM #17
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    So how is looking at a tyre sidewall going to tell you the offset of the wheel? The PCD of the wheel? The centre hole that slips over the hub? How many bolt holes it has?
    Especially as they are just wheels and don't have any tyres on them.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  18. 23-04-11, 05:53 PM #18
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    On Carsales now
    http://www.carsales.com.au/all-cars/...d=129AD14CBA0C
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  19. 23-04-11, 06:02 PM #19
    ova400
    ova400 is offline
    Registered User
    Join Date
    Apr 2010
    Location
    Brisbane
    Posts
    30
    whats the towing capacity on this??
    Reply With Quote Reply With Quote
  20. 23-04-11, 06:06 PM #20
    MRMOPARMAN
    MRMOPARMAN is offline
    smilin' for the camera MRMOPARMAN's Avatar
    Join Date
    Oct 2004
    Location
    Kangaroo flat!
    Posts
    6,415
    2500kg braked. 750kg unbraked.
    Quote Originally Posted by Sathanas View Post
    Ballarat is as fun as putting my nads into that press
    Quote Originally Posted by Russell View Post
    Ballarat people are generally mongs who need twice as long to do the simplest of tasks.
    Quote Originally Posted by VE Safari View Post
    You know you're a real shit cunt when jmac starts ragging on you too.
    '75 international acco fire truck!!
    '70 VG sedan - current project, now 13's for $1300 project
    '70 dodge yoot, current project - mothballed long term
    '73 KE25 corolla - race car
    '74 KE25 corolla - back on the road!
    '89 BNR32 skyline - mothballed..
    Reply With Quote Reply With Quote
  21. 02-05-11, 05:22 PM #21
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Looks like it's sold.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  22. 02-05-11, 06:52 PM #22
    MRMOPARMAN
    MRMOPARMAN is offline
    smilin' for the camera MRMOPARMAN's Avatar
    Join Date
    Oct 2004
    Location
    Kangaroo flat!
    Posts
    6,415
    PF member?
    Quote Originally Posted by Sathanas View Post
    Ballarat is as fun as putting my nads into that press
    Quote Originally Posted by Russell View Post
    Ballarat people are generally mongs who need twice as long to do the simplest of tasks.
    Quote Originally Posted by VE Safari View Post
    You know you're a real shit cunt when jmac starts ragging on you too.
    '75 international acco fire truck!!
    '70 VG sedan - current project, now 13's for $1300 project
    '70 dodge yoot, current project - mothballed long term
    '73 KE25 corolla - race car
    '74 KE25 corolla - back on the road!
    '89 BNR32 skyline - mothballed..
    Reply With Quote Reply With Quote
  23. 02-05-11, 09:15 PM #23
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Nope, a bloke via Carsales.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  24. 02-05-11, 09:26 PM #24
    Roadsailing
    Roadsailing is offline
    formerly shinybluesteel Roadsailing's Avatar
    Join Date
    Aug 2003
    Location
    melbourne
    Posts
    2,950
    Quote Originally Posted by ova400 View Post
    whats the towing capacity on this??
    yeah bill, look at the towball, it will have the towing capacity on it.











    :P
    Reply With Quote Reply With Quote
  25. 02-05-11, 10:01 PM #25
    MRMOPARMAN
    MRMOPARMAN is offline
    smilin' for the camera MRMOPARMAN's Avatar
    Join Date
    Oct 2004
    Location
    Kangaroo flat!
    Posts
    6,415
    the towball will have something like 3500kg rating on it usually..

    look at the bar for tow ratings, and ball. then dont go over the lowest amount.
    Quote Originally Posted by Sathanas View Post
    Ballarat is as fun as putting my nads into that press
    Quote Originally Posted by Russell View Post
    Ballarat people are generally mongs who need twice as long to do the simplest of tasks.
    Quote Originally Posted by VE Safari View Post
    You know you're a real shit cunt when jmac starts ragging on you too.
    '75 international acco fire truck!!
    '70 VG sedan - current project, now 13's for $1300 project
    '70 dodge yoot, current project - mothballed long term
    '73 KE25 corolla - race car
    '74 KE25 corolla - back on the road!
    '89 BNR32 skyline - mothballed..
    Reply With Quote Reply With Quote
  26. 02-05-11, 10:04 PM #26
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Quote Originally Posted by MRMOPARMAN View Post
    the towball will have something like 3500kg rating on it usually..

    look at the bar for tow ratings, and ball. then dont go over the lowest amount.

    I just had a good look and it says, "THE CAR HAS BEEN SOLD I DON'T GIVE A SHIT."
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  27. 02-05-11, 10:14 PM #27
    MRMOPARMAN
    MRMOPARMAN is offline
    smilin' for the camera MRMOPARMAN's Avatar
    Join Date
    Oct 2004
    Location
    Kangaroo flat!
    Posts
    6,415
    that was directed at roadsailing
    Quote Originally Posted by Sathanas View Post
    Ballarat is as fun as putting my nads into that press
    Quote Originally Posted by Russell View Post
    Ballarat people are generally mongs who need twice as long to do the simplest of tasks.
    Quote Originally Posted by VE Safari View Post
    You know you're a real shit cunt when jmac starts ragging on you too.
    '75 international acco fire truck!!
    '70 VG sedan - current project, now 13's for $1300 project
    '70 dodge yoot, current project - mothballed long term
    '73 KE25 corolla - race car
    '74 KE25 corolla - back on the road!
    '89 BNR32 skyline - mothballed..
    Reply With Quote Reply With Quote
  28. 02-05-11, 10:20 PM #28
    Roadsailing
    Roadsailing is offline
    formerly shinybluesteel Roadsailing's Avatar
    Join Date
    Aug 2003
    Location
    melbourne
    Posts
    2,950
    Quote Originally Posted by MRMOPARMAN View Post
    that was directed at roadsailing
    oh and by the way i was joking

    free bump!
    Reply With Quote Reply With Quote
  29. 11-05-11, 12:55 PM #29
    Billzilla
    Billzilla is offline
    blinks ... Billzilla's Avatar
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    21,325
    Sold.
    Contact me for -
    Light fabricaton & welding services.
    Autocad design & water-cutting of manifold flanges and other parts.
    3D printing in ABS plastic.
    PF's official Chemtrails Pilot.

    http://www.billzilla.org
    Reply With Quote Reply With Quote
  30. 11-05-11, 01:49 PM #30
    TonyJZX
    TonyJZX is online now
    FCKGW-RHQQ2-YXRKT TonyJZX's Avatar
    Join Date
    May 2003
    Location
    Sydney
    Posts
    20,776
    is this car sold yet?
    Quote Originally Posted by boxxx

    Deutsche Bahn Rail: Trains are a great way to get lots of people concentrated into a small area, like a camp.
    ACA/TT: Where's the line between a car enthusiast and hoon? There is none
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules