Recently i was able to pick up a whole bunch of new tube and AN fittings from a guy who was scrapping his project, and along with the box of bits there were a pair of fuel filters, which i am now considering using for the race car.
The first one seems to be a Russell 645070 (http://www.summitracing.com/parts/RUS-645070/) which the guy had intended for the pre-lift pump to surge tank filter, and i was thinking i could use the same.
The second one is a Russell 650133 (http://www.summitracing.com/parts/RUS-650133/) which looks like it would be good for a high pressure feed filter.
Any opinions on these filters, and especially with regard to using them with E85? I cant find a huge amount around as to whether they woudl eb good for E85, although they are simply stainless/bronze filters, so i cant see anything terribly much which would be incompatible (apart from maybe the rubber seals).