Page 1 of 2 12 LastLast
Results 1 to 30 of 44

Thread: Cam's LS1 powered 1965 Chevy Nova

  1. #1
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371

    Cam's LS1 powered 1965 Chevy Nova

    Hurry up cunt. I started a thread for you and everything.
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  2. #2
    [DIRTY31] lysdexia's Avatar
    Join Date
    Apr 2005
    Location
    Bunbury
    Posts
    2,239
    lol
    HR31 Coupe - RB20, Bilsteins, Cage and shit
    R31 Ti - Sun Visor, Venetian Blinds, Coilovers, Whiteline Bars, Wog Stance.

    Quote Originally Posted by Mr Jones View Post
    Farmer its all about how you cut them up, like a dead hooker jigsaw puzzle.

  3. #3
    in the doghouse
    Join Date
    Feb 2010
    Location
    Bendigo, Victoria
    Posts
    803
    Lol, fkn awesome sauce.
    Quote Originally Posted by lickmyleftone View Post
    But by all means drink a litre of rum, double bag the old fella and grunt one up it. If that floats ya boat.

  4. #4
    Slanted big_pete's Avatar
    Join Date
    Sep 2003
    Location
    Wagga
    Posts
    4,064

  5. #5
    Opens psssi98's Avatar
    Join Date
    Nov 2001
    Location
    PF Brisbane Cuntarm
    Posts
    13,167
    This thread makes me moist.

    Azz has clearly stated he will not help me with anything on my car unless it involves fitting an LS1. Everyone needs more friends like Azz.
    PF's personal purveyor of pleasant wooden penises.

  6. #6
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    I offered to fix the earth on your ignition coil, but after 4 days you figured it out on your own.
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  7. #7
    Opens
    Join Date
    Nov 2001
    Location
    Brisbane
    Posts
    1,989

  8. #8
    Opens psssi98's Avatar
    Join Date
    Nov 2001
    Location
    PF Brisbane Cuntarm
    Posts
    13,167
    This is true, and fuck you (it wasn't earth but I am not electrician either so joined some wires and it went vroommmm...good enough for me)
    PF's personal purveyor of pleasant wooden penises.

  9. #9
    Opens psssi98's Avatar
    Join Date
    Nov 2001
    Location
    PF Brisbane Cuntarm
    Posts
    13,167
    PF working bee in Azz's driveway, I'll supply LS1, can someone bring a gearbox.
    PF's personal purveyor of pleasant wooden penises.

  10. #10
    Retired Finger Painter Karnage's Avatar
    Join Date
    Feb 2009
    Location
    Northside Brisbane
    Posts
    953
    Quote Originally Posted by psssi98 View Post
    so joined some wires and it went vroommmm...good enough for me)
    So only the mechanical side of the conversion to do then?

  11. #11
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    Leigh stole my engine crane.

    Take to sunshine coast.

    I have to head up in the morning, I can drop it off for you?
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  12. #12
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    PAYTHEMAN!
    DOITFAGGOT.

    etc.
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  13. #13
    あなたの母親の肛門 Shifty's Avatar
    Join Date
    Nov 2001
    Location
    Brisbane
    Posts
    9,532
    You can have your engine crane back. But you have to come get it
    RN90 Hilux - Ecotec V6 & 5sp

  14. #14
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    I've decided it's going to take you 6months and cost $12k.

    $10k to buy doner and get it fitted (mounts, intake, exhaust and tailshaft only)
    Then 6 months of your weekends and $2k in rubbish to get it finished and running at home by yourself.
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  15. #15
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    You shouldn't do it though, it's a shit idea.

    SBC crate motor with new everything bolted on, $10k, drop in at home, do up 17 bolts, fill with tap water, prime it with fuel and go skid
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  16. #16
    Registered User GreatWallGT500's Avatar
    Join Date
    Dec 2012
    Location
    melbourne
    Posts
    393
    fuck the crate motor idea he should buy one that needs a rebuild and send it to TK along with a cheque for 15k

  17. #17
    Registered User GreatWallGT500's Avatar
    Join Date
    Dec 2012
    Location
    melbourne
    Posts
    393
    then he can sit at home moisturising his girly hands while it gets built

  18. #18
    Registered User I'm DJ!'s Avatar
    Join Date
    Jan 2012
    Location
    Beach-ville
    Posts
    3,252
    In on Juan
    DJ's don't need sigs

  19. #19
    \/ \/ My motivation \/ \/ ALLMTR's Avatar
    Join Date
    Feb 2002
    Location
    Newcastle-ish
    Posts
    17,652
    The peer pressure is strong with this one
    No 4 on the Cessnock Street Outlaws list

    2011 Westfield Arrow 20v
    Ls1 Nitrous Rodeo
    2014 Sylva Riot
    1964 El Camino
    1996 HD sporty

  20. #20
    Pastafarian Monk's Avatar
    Join Date
    Oct 2002
    Location
    Brisvegas
    Posts
    5,185
    Subscribed.


  21. #21
    Registered User JZK25's Avatar
    Join Date
    Feb 2004
    Location
    Sunshine Coast, Qld.
    Posts
    6,716
    VH45/RE4R03A/GT4088/PS500/Skids.

    Or Hyundai Tau V8, they are mint.

    Last edited by JZK25; 28-07-13 at 07:54 AM.
    David Fraser - Automotive Historian!

    Quote Originally Posted by bigmuz View Post
    You can't polish a turd but you can put 600hp in it and laugh your fucking arse off coming past someone sideways at Powercruise.

  22. #22
    Opens psssi98's Avatar
    Join Date
    Nov 2001
    Location
    PF Brisbane Cuntarm
    Posts
    13,167
    PF's personal purveyor of pleasant wooden penises.

  23. #23
    cunning linguist lickmyleftone's Avatar
    Join Date
    Jul 2010
    Location
    Mt Cotton
    Posts
    1,714
    Buy it NOW!!!!
    The World's Best Carpet, Upholstery, Tile Cleaning and Pest Control in Brisbane at PF mates rates, PM me.

    when all else fails, hit it harder.

  24. #24
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    I don't get it, it's still available. Someone lend Cam a computer, his must be broken.
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

  25. #25
    Slanted big_pete's Avatar
    Join Date
    Sep 2003
    Location
    Wagga
    Posts
    4,064

  26. #26
    Opens psssi98's Avatar
    Join Date
    Nov 2001
    Location
    PF Brisbane Cuntarm
    Posts
    13,167
    If it's not fucked that's a pretty tidy price for engine and box. Negotiations with Mrs have begun.
    PF's personal purveyor of pleasant wooden penises.

  27. #27
    Registered User JZK25's Avatar
    Join Date
    Feb 2004
    Location
    Sunshine Coast, Qld.
    Posts
    6,716
    Fuck man, go for gold, none of this faggoty LS1 shit.

    P.S. Doitfaggot.
    David Fraser - Automotive Historian!

    Quote Originally Posted by bigmuz View Post
    You can't polish a turd but you can put 600hp in it and laugh your fucking arse off coming past someone sideways at Powercruise.

  28. #28
    Owns a Ferrari BeverlyHillsCop's Avatar
    Join Date
    Aug 2006
    Location
    Garage
    Posts
    3,230
    Fit a 2JZ!!!!!!!111one
    /csh Racing

  29. #29
    Opens psssi98's Avatar
    Join Date
    Nov 2001
    Location
    PF Brisbane Cuntarm
    Posts
    13,167
    http://www.ebay.com.au/itm/Complete-...51078232614%26

    Al - what sort of money does your customer want for his 5.7 (think TT lowball like a cunt)
    PF's personal purveyor of pleasant wooden penises.

  30. #30
    Opposed to the PFAD Bill
    Join Date
    Feb 2005
    Location
    Brisbane
    Posts
    8,371
    Quote Originally Posted by BeverlyHillsCop View Post
    Fit a 2JZ!!!!!!!111one
    GTFO of my thre. Cam's thread.
    Quote Originally Posted by VRSenator065 View Post
    Mate of mine is an industrial chemist specialising in fuel/oil analysis. Actually he has some small bottle samples of Peter Brock and Dick Jophnsons race engine oils, but I digress. He told me my red super cheap jerrys were fine but to put them on blocks of wood not directly onto the concrete as it will absorb moisture from the floor. Sounded like BS to me but his brain is the size of a small planet so that's what I do.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •