Page 7 of 7 FirstFirst ... 34567
Results 181 to 194 of 194

Thread: Blue haze

  1. #181
    Registered User PXL265's Avatar
    Join Date
    Nov 2012
    Location
    Brisvegas
    Posts
    2,642
    Good to see you were able to make use of it, and a bit of the 'tona lives on....

    Sent from my XT1635-02 using Tapatalk

  2. #182
    Non Compos Mentos Gammaboy's Avatar
    Join Date
    Jun 2008
    Location
    Brisbane
    Posts
    16,723
    Quote Originally Posted by PXL265 View Post
    Good to see you were able to make use of it, and a bit of the 'tona lives on....

    Sent from my XT1635-02 using Tapatalk
    It doesn't - he's fitted an Acossato master, clutch perch and levers!
    The Acossato stuff is supposed to be very good.
    Last edited by Gammaboy; 24-05-19 at 11:06 AM.
    "Where can we get hold of a Vincent Black Shadow?" "Whats that?" "A fantastic bike," I said. "The new model is something like two thousand cubic inches, developing two hundred brake-horsepower at four thousand revolutions per minute on a magnesium frame with two styrofoam seats and a total curb weight of exactly two hundred pounds."

  3. #183
    Registered User PXL265's Avatar
    Join Date
    Nov 2012
    Location
    Brisvegas
    Posts
    2,642
    Well it did for a little bit then.....

    I thought the mc got a run, but the I did read it at sparrow's over here....

    Sent from my XT1635-02 using Tapatalk

  4. #184
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    Took it for a quick squirt and it's amazing how much more modern and precise the ride is without the play in the levers. I suppose the originals are 23+ years old now.

    Sent from my MI 6 using Tapatalk

  5. #185
    Registered User PXL265's Avatar
    Join Date
    Nov 2012
    Location
    Brisvegas
    Posts
    2,642
    Excellent, so smoking up a suburb near me with that sweet 2 stroke smell more often now....

    Sent from my XT1635-02 using Tapatalk

  6. #186
    Non Compos Mentos Gammaboy's Avatar
    Join Date
    Jun 2008
    Location
    Brisbane
    Posts
    16,723
    Quote Originally Posted by MVLUV View Post
    Took it for a quick squirt and it's amazing how much more modern and precise the ride is without the play in the levers. I suppose the originals are 23+ years old now.

    Sent from my MI 6 using Tapatalk
    Upgrading to modern radial masters on the Bimbo is in the future somewhere... either RCSs or Acossatos...
    "Where can we get hold of a Vincent Black Shadow?" "Whats that?" "A fantastic bike," I said. "The new model is something like two thousand cubic inches, developing two hundred brake-horsepower at four thousand revolutions per minute on a magnesium frame with two styrofoam seats and a total curb weight of exactly two hundred pounds."

  7. #187
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    RCS Corsa corta is porn but out of my price range.

  8. #188
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    Couple more little jobs to tick off before the track Day Sunday are,
    1. New plugs as these have been in since late 17 and have noticed a little fouling on one one cylinder if you have puttered around for a while. A good apprentice tune always fixes it.

    Trying iridiums

    Lower cylinder is easy.

    Upper no so easy but still doable.


    Job 2. Empty oil drain bottles.
    Get distracted with how nice the pipes are every time I take the belly pan off.

    Sent from my MI 6 using Tapatalk

  9. #189
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    Job 3. Make some mirror blanking plates. I just cable tie with a bit of rubber underneath for the gsxr, but I don't think the fairing is as robust on the tyga stuff.
    Just cut out some aluminium I had and glued some rubber underneath.


    Now it's ready to go.

    Sent from my MI 6 using Tapatalk

  10. #190
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    Bitter sweet day at the track today.
    We knew the chance of rain was high but we were signed up and committed.
    3 good sessions were had and then the skies opened up and wrote off the day all bar a couple of loose units willing to have a crack on a wet track. Not my cup of tea.

    I did the first and third session on the rgv and had a ball. Gearing was great for all corners except for 1 and 2. Second gear was too high and third was too low so a bit of clutch slip out of the corner helped keep it above about 9k.
    Brakes and suspension feel great, it rails through corners and the brakes were well and truly up to the task for the two 15 minute sessions.
    To run with the bigger bikes you do have to wring it's neck and short shifting results in loss of revs for the rest of the straight which QR is just a series of.
    Click image for larger version. 

Name:	received_361388094733965.jpg 
Views:	16 
Size:	48.5 KB 
ID:	111981

    Sent from my MI 6 using Tapatalk

  11. #191
    Registered User PXL265's Avatar
    Join Date
    Nov 2012
    Location
    Brisvegas
    Posts
    2,642
    Awesome, was probably one of the best sounding out there too, with the little 2 stroke revving it's tits off

    Sent from my XT1635-02 using Tapatalk

  12. #192
    Temporary Australian Rorz de Puniet's Avatar
    Join Date
    Dec 2010
    Location
    Sydney
    Posts
    3,466
    Those pipes are sick.
    Randy De Puniet has had more crashes than any other rider in the history of Grand Prix motorcycle racing.

  13. #193
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    On a recent ride this was struggling to climb through the revs past 8k. Had plenty of fuel and the plugs only have 200klms on them so decided to have a look at the power valves.

    Access is not too bad and you can do it without removing the radiator if the mounts are unbolted and pushed forward.
    Once removed they were pretty nasty.

    They only have about 1300 kays on them but it has also done 3 Dyno sessions.
    I'm sure they would look cleaner if it was ridden harder but having a licence is convenient.
    I found the best way to clean them up was to scrape off the baked on carbon with a razor blade then give a once over with a scotch brite pad.


    Valves back in, shaft through the top, pulleys on and cables set.

    Test run proved a success, pulls clean to red line with no hesitation.

    Sent from my MI 6 using Tapatalk

  14. #194
    Registered User MVLUV's Avatar
    Join Date
    Feb 2012
    Location
    Brisneyland Aus
    Posts
    226
    One other job I did while the fairing was off was to change the indicator buttons over.
    I have persisted with a button on each bar for the respective indicator.
    Could not get used to it. I thought it would be intuitive but going in and out of corners usually means adjusting throttle inputs and a bit of front brake work.
    On the left is just easier. BMW used to do it not sure if they still do but it's not for me.
    The two blue buttons are indicators.
    One of the white buttons is for lights and high beam with a long push and the other is a spare.
    I just swapped the plug pins over so the right blue now does the lights and the left top white is for right indicator.


    Sent from my MI 6 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •