Results 1 to 16 of 16

Thread: 2.2L SR20 turbo selection

  1. #1
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358

    2.2L SR20 turbo selection

    Hey cunts,

    SR20 I have has the 3540 with some bigger comp wheel by GCG, core has too much end float so I want to replace it. I have 3 options.

    GTX35 $2700 bolt in
    Put new core in the 3566 about $1100 bolt in
    Precision 6266 about 2700 need to model up dump drain etc

    What is the best option.
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  2. #2
    Resident Expert too_much_boost's Avatar
    Join Date
    Nov 2001
    Location
    Racetrack
    Posts
    516
    Depends. Are you reasonably happy with that turbo? Replacing with the same core saves retune too, assuminig its running atm
    Disclaimer: I may have no idea what I am talking about

  3. #3
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358
    Yes it is all running, what I was after is say is the precision that much better?
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  4. #4
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358
    #donald #coalisbad #feminism #leftisbest

    Just trying to get a technical question some airtime
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  5. #5
    Arrogant wankeler Slides's Avatar
    Join Date
    Jul 2009
    Location
    Central West/Lake Macquarie
    Posts
    1,382
    Procharge were doing 9 blade turbine upgrades pretty cheap?

  6. #6
    Registered User LB-XP's Avatar
    Join Date
    Jun 2014
    Location
    Melbourne
    Posts
    1,041
    Ben at procharge is also one of the nicest guys in the trade. Very helpful and knowledgeable.

  7. #7
    Registered User JZK25's Avatar
    Join Date
    Feb 2004
    Location
    Sunshine Coast, Qld.
    Posts
    7,816
    GTX3582. 3566 is old TO4Z compressor on GT35 turbine.
    If you are negro riche then get a complete GTX3584RS. Assuming you want more power.
    David Fraser - Automotive Historian!

    Quote Originally Posted by bigmuz View Post
    You can't polish a turd but you can put 600hp in it and laugh your fucking arse off coming past someone sideways at Powercruise.

  8. #8
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358
    What sort of lag we talking going up to the rs?

    Also does this run the same turbine side eg will the dump bolt up or need to mod?
    Last edited by PLAYA; 13-06-18 at 12:04 PM.
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  9. #9
    infantile egomaniac CussCuss's Avatar
    Join Date
    Nov 2001
    Location
    Old Pac
    Posts
    6,888
    GTX3584RS wont bolt up, its Vband everything and the housings are not compatible.

    GTX3582R Gen 2 should have the same turbine wheel as an old GT35R, which I think is the same as a GT3540, so it should be fine to swap the turbine housings and pretty much bolt on.

    Maps are available on the garrett website but I dont know how to compare to what you have now. Should be at least the same or better power.
    this signature intentionally left blank

  10. #10
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358
    So I read a bit on the Garrett site, gen 2 gtx3582 uses same old exhaust housing, gtx3584 is all new turbine side so I am getting a price on that but I'm thinking a gen 2 gtx3582 is prob half smart as bolt on and prob same or more power. But I am tempted by the new 3584rs lol
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  11. #11
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358
    Ok cunts well I went with precision 6266, my friend convinced me mind you he has a much larger PT at 55 psi on a SR20 and does 180 mph so we will see how this smaller one goes. He says to not be scared on the boost levels cos these things keep making your 10kw per psi. When it makes about 460 I'll stop winding in.
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  12. #12
    BLING BLING PLAYA's Avatar
    Join Date
    Mar 2002
    Location
    adelaide
    Posts
    6,358
    Well cunts cos I'm lazy AF I have chucks gtx35 coming and will bolt it on. So I might do some comparisons as I have the 6266 here as well.
    3D scanning
    3D modelling
    Structural certification
    3 and 5 axis milling

  13. #13
    Registered User MWP's Avatar
    Join Date
    May 2002
    Location
    Adelaide
    Posts
    1,823
    EFRs never got considered?
    I've got a 7163G (twin-scroll internal gate) on the way for my 2.2L 3SGTE.

    Funnily enough, im buying it from Supercheap Auto.
    GCG have the 7163 advertised for ~$3200.
    I ordered it on Supercheaps website while they had a 30% off sale a few weeks back... came to $2300
    (they sell some Garrets too BTW).
    Last edited by MWP; 21-11-18 at 03:16 AM.

  14. #14
    Registered User mad_cow's Avatar
    Join Date
    Aug 2010
    Location
    Canberra
    Posts
    1,317
    Cant find any turbos on supercheap wensite?

  15. #15
    Registered User
    Join Date
    Sep 2013
    Location
    Maudsland, Gold Coast
    Posts
    6,543
    Quote Originally Posted by mad_cow View Post
    Cant find any turbos on supercheap wensite?
    https://www.supercheapauto.com.au/p/...gment=1&page=1

    Don't mention the adBlocker !!


  16. #16
    Arrogant wankeler Slides's Avatar
    Join Date
    Jul 2009
    Location
    Central West/Lake Macquarie
    Posts
    1,382
    Quote Originally Posted by MWP View Post
    EFRs never got considered?
    I've got a 7163G (twin-scroll internal gate) on the way for my 2.2L 3SGTE.

    Funnily enough, im buying it from Supercheap Auto.
    GCG have the 7163 advertised for ~$3200.
    I ordered it on Supercheaps website while they had a 30% off sale a few weeks back... came to $2300
    (they sell some Garrets too BTW).
    Fuck that is good value. Shame they haven't been arsed to fill in the descriptions for most of the products, have to work out your part numbers somewhere else.
    Last edited by Slides; 26-11-18 at 11:41 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •