Results 1 to 4 of 4

Thread: Dust & fume extraction options

  1. #1
    Registered User
    Join Date
    May 2014
    Location
    Sydney
    Posts
    745

    Dust & fume extraction options

    Got a little fabrication room set up at work. While I run a fan for the room to circulate fresh air, it's ok at best so I've been looking at a few options for a portable fume extraction unit & some extraction fans for the room itself.

    Anybody have a similar setup? Any recommendations or if you know of a company who can provide an extraction unit and install fans into the room would be awesome!

  2. #2
    Registered User
    Join Date
    Dec 2007
    Location
    melbourne
    Posts
    5,197
    How many cubic somethings is the room?

    How well sealed is the room now?

    Is it climate controlled?

  3. #3
    Registered User
    Join Date
    May 2014
    Location
    Sydney
    Posts
    745
    Quote Originally Posted by chartreusehj View Post
    How many cubic somethings is the room?

    How well sealed is the room now?

    Is it climate controlled?
    Room size is roughly 8m x 10m. The room itself is fairly well sealed, I did remove a door to get some more airflow through it but can always put it back. No climate control or A/C etc.

  4. #4
    Registered User
    Join Date
    May 2014
    Location
    Sydney
    Posts
    745
    Ended up getting one of these - https://www.machineryhouse.com.au/W270

    Not a bad unit, bit noisy but sure does the job. Only complaint is the dicky bendy hose for the filter head but it's not the end of the world.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •