Announcement

Collapse
No announcement yet.

Circuit VL commo - HSVSUX

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HSVSUX
    replied
    Other small jobs to do very soon:

    Mount Motec E888
    Mount suspension position sensors - (brackets designed)
    Mount shifter position sensor
    Fit front wheel speed sensors

    Big jobs:

    Finish cabin loom
    Configure ECU, CDL3, PDM, E888, Keypad
    Start!
    Replace valve springs with correct ones (soft springs installed now to help break in)
    Tune
    Make front guards in glass
    Mount front doors (bolt / fibreglass hinges into new doors)
    Fit the rest of the Lexan windows (already made)
    Finish new front roll bar arms
    Last edited by HSVSUX; 17-06-20, 08:56 PM.

    Leave a comment:


  • HSVSUX
    replied
    Still chipping away.....
    Main project at the moment is the cabin wiring loom, planning, measuring, laying up drawing on table..
    Then felt the need to have more things logged and some future proofing, so got a Motec E888 expander.
    now loom has changed of course, replanned, remeasured, reworked table layout, I have made a start with actually running wires! Need a good run of spare time to get stuck in and finish the loom.

    so in the mean time, I went to mount the Bosh Motorsport DBW pedal, I just couldn’t get it to fit due to the roll cage bar from the bottom of the A pillar to the front strut tower.
    Plan B has been to cut up the std VL pedal and mount a dual TPS to it.
    Attached Files
    Last edited by HSVSUX; 17-06-20, 09:00 PM.

    Leave a comment:


  • Mr Ree
    replied
    Subscribed

    Great build so far, mate.

    Leave a comment:


  • BLO 767
    replied
    Lord there's some serious parts in there. Very cool.

    Leave a comment:


  • TUFGMH
    replied
    Awesome job, definitely ready for business

    Leave a comment:


  • oldracer
    replied
    Wow, that’s a big build, very cool, so u nearly ready to turn a wheel????

    Leave a comment:


  • HSVSUX
    replied
    Brakes finished (new lines, rear calipers, new CNC front caliper brackets, pressure sensors, new ducting.

    Freshened motor with new head/cam/springs/Ti retainers. Billet oil pump gears, New GTX4088r, new 50mm Gen V gate with pos sender, 1550cc inj, R35 GTR coils, new PRP cam and crank triggers, new mini alternator, new 74mm Bosch DBW T/B, M800 Motec, PDM15, CDL-3 dash, radiator, PS pump,

    Front suspension (struts rebuilt/valving changed, threaded tubes shortened and raised to clear taller 680mm tyres, new shorter springs, bump steer kit, swaybar arms now go under control arms)

    Please excuse the crap pics!
    interior finishing and wiring are a work in progress....

    Running gear all sorted and in, diff freshened, 3.23 gears, temp sender in hat, (still 31 spline full spool and Strange axles.
    Gearbox (same spec but all new)


    Attached Files
    Last edited by HSVSUX; 02-05-20, 07:10 PM.

    Leave a comment:


  • HSVSUX
    replied
    New engine bay loom (all Tefzel / DR25) labelled
    Attached Files

    Leave a comment:


  • HSVSUX
    replied
    Boot finished (new tank, 2 new 044’s, 2 new lift pumps, Ethanol content sensor, fuel level sender, new tefzel / DR25 wiring - labelled)
    Attached Files

    Leave a comment:


  • albo
    replied
    Here's one somebody prepared earlier..
    http://www.my105.com/ListingDetails/id/21442/latest/1

    Leave a comment:


  • HSVSUX
    replied
    Originally posted by Lurch View Post
    Great to hear from you mate.
    I look forward to it hitting the track!

    What series will you be competing in now?
    Hey, how are ya? Not sure on series, maybe just club stuff. Same enjoyment but only one day instead of three

    Leave a comment:


  • HSVSUX
    replied
    Also rebuilt / modified PS pump with bigger pulley and fabricated bracket
    Attached Files

    Leave a comment:


  • Lurch
    replied
    Great to hear from you mate.
    I look forward to it hitting the track!

    What series will you be competing in now?

    Leave a comment:


  • HSVSUX
    replied
    Hey all, some work done (not as much as I had hoped)

    Xspurt 1550cc injectors in

    Platinum Racing Products crank and cam trigger kit on

    R35 coil on plug conversion underway

    Dizzy bung machined up

    New TS gen V 50mm gate with position sensor going on (old TS 50mm gate tired and diaphragm was ruptured)

    Deutsch HDP20 47 way ‘mixed’ connector mounted in firewall ready for nice removable loom to get underway.

    Still chipping away on the dreaded list....

    Leave a comment:


  • BLO 767
    replied
    Is there something in the NZ water that just makes you guys build stunningly quality, mental cars?

    Always impresses me what comes from our neighbors. Keep 'em coming (pics) :D

    Leave a comment:

Working...
X