Announcement

Collapse
No announcement yet.

$800 shit heap EP71

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • crack
    replied
    shit yeah

    Leave a comment:


  • no13b_Coupe
    replied
    Mad! Be sure to get vids.

    Leave a comment:


  • Euronymous
    replied
    time for some wheelie bars to keep the front down like STARLET.

    Leave a comment:


  • dnegative
    replied
    24th @ WSID?

    Leave a comment:


  • foamy
    replied
    Finally got to take this for a drive in the dry. It's hard to tell how quick it really is because the tyres on it get turned the moment it comes on boost. Dneg dropped off a set of 15" rims with some semis on it, so I'll wack them on and get a better feel. Butt dyno says it will definitely do a 13sec pass now (previously did a 14.1 and that was with it falling out of boost between gears).

    Unfortunately the bonnet cable needs repairing (pivot points keep working free and the cable goes slack). It also developed a huge oil leak out of the dizzy, so I'm getting a new o-ring for that + some leads that actually fit the dizzy & coil properly. It also has a small exhaust leak so I'll fix that up too....

    Once that's done I'll go back to EC and try set a time with it!

    Leave a comment:


  • no13b_Coupe
    replied
    Bring it down to Wodonga for track lols.

    Leave a comment:


  • foamy
    replied
    I think a cage would be a sensible idea before I send it on a pac run. Between the Cusco LSD and the boost it's a torque steering nightmare.

    Stage 3 for this car will be probably late 2020. I think my plan will be to fit a Borg Warner EFR6258 onto it and a set of 264 degree cams. Spoon feed 25psi of boost & E85 and try crack 230fwkw.

    Leave a comment:


  • trdee
    replied
    bring it on a pac run so we can watch as it torque steers itself into a cliff lol

    Leave a comment:


  • foamy
    replied
    As soon as it's back I'll be out at Eastern Creek to send it, so yeh I'll load the GoPro into it and see what it can do

    Leave a comment:


  • Euronymous
    replied
    Nice so you will be able to stop this unruly tin can of death now.

    *eagerly awaits limiter bashing, non steering powerskid vids.

    Leave a comment:


  • foamy
    replied
    Originally posted by no13b_Coupe View Post
    Haha mad!

    Did you stick with the adpatronic or bin it in it the end?
    It's still on there (unfortunately), the amount of money I've now spent on having issues with it fixed I could of bought a Motec!

    I might get it back today. I ended up giving the tuner the brake upgrade I had laying around to fit (off a GT EP82). It bolted up no problem, but the spline size is different on the CV outers. So sent him some EL54 Paseo outers to change over onto it. Basically the NA Starlet stuff uses the 23 tooth spline, anything GT uses 26 spline. The Paseo gear is the same as the turbo Starlet setup.

    Leave a comment:


  • I'm DJ!
    replied
    220hp in this will be sick as.

    If you get bored of it let me know, would be keen :-)

    Leave a comment:


  • no13b_Coupe
    replied
    Haha mad!

    Did you stick with the adpatronic or bin it in it the end?

    Leave a comment:


  • Euronymous
    replied
    Thats the best kind of terrifying isnt it? Add to that, lane hopping torque steer and you got yourself a
    Fucking party!

    Leave a comment:


  • dnegative
    replied
    Originally posted by Euronymous View Post
    Nice, should go hard. 220hp in something that small should be fairly brutal.
    Brutal? Its a 700kg tin can
    Its going to be fucking terrifying

    Leave a comment:

Working...
X