No announcement yet.

Honda Ek4

  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by schnitzelburger View Post
    dunno if pics arent loading or what but keen to see wat it looks like from the outside?
    Just realised I never posted any pictures of the car

    This is the Ek4 in all its glory:

    Click image for larger version  Name:	967070_10151669863740799_1505473709_o.jpg?_nc_cat=109&_nc_sid=f9d7a1&_nc_ohc=PYWiSStovOMAX9jzoSc&_nc_ht=scontent.fsyd4-1.fna&oh=8ac997ecd8b757ce1c102cba4bc789df&oe=5FA69B26.jpg Views:	10 Size:	280.0 KB ID:	7184767
    Click image for larger version  Name:	22555017_10156732878528135_5644945526885774063_n.jpg?_nc_cat=100&_nc_sid=8bfeb9&_nc_ohc=wcyw1KZM0RcAX9S0jmM&_nc_ht=scontent.fsyd4-1.fna&oh=2d9236bc1c0cf9e409a87e8c90e9c411&oe=5FA3DCA6.jpg Views:	9 Size:	129.3 KB ID:	7184768
    Click image for larger version  Name:	13962981_10155111816058135_3077242244869226107_o.jpg?_nc_cat=103&_nc_sid=730e14&_nc_ohc=ivpTHGTAnrYAX8BLdTc&_nc_ht=scontent.fsyd4-1.fna&oh=f1eeee3d41c2ddce8b9147ea67f8ff80&oe=5FA5AC17.jpg Views:	10 Size:	941.3 KB ID:	7184770
    Attached Files
    Last edited by Kiwi EK4; 09-10-20, 04:02 PM.


      Click image for larger version

Name:	121976010_352262852855114_3824859020163589568_n.jpg
Views:	1325
Size:	709.6 KB
ID:	7188093

      Click image for larger version

Name:	122129965_1327681390911638_1516427047559647464_n.jpg
Views:	1351
Size:	1.18 MB
ID:	7188094

      Everyone loves a nice Flange - nice CNC cut PRL head flange
      Attached Files


        Clutch & Flywheel acquired - will get the gearbox rebuilt and these fitted late Jan / early Feb

        Also purchased a 66mil throttle body should make thing easier with future pipe work

        Cars getting repainted over Christmas / New Years back to Milano Red from Milano Pink


          Got the car painted just after new Years

          Its now Milano Red not again, very very happy with the Job done

          I then proceed with purchase a House on Sydney's Northshore and now the Gearbox rebuild and turbo Fab work are postponed until mid to end of the year


            Getting some bigger stoppers:

            Click image for larger version

Name:	164705617_4036471053059448_6656844572862372656_n.jpg?_nc_cat=106&ccb=1-3&_nc_sid=b9115d&_nc_ohc=IpQyoZxlRxgAX-JuLTZ&tn=VcP2tUlHsHsyIr44&_nc_ht=scontent.fsyd3-1.fna&oh=b046c89800d25187d63fa48af16506a2&oe=60A95294.jpg
Views:	522
Size:	102.2 KB
ID:	7247123

            Alcon crb343 calipers
            Forza rotors 295mm x 32mm
            Hawk dtc70 brake pads


              They should put you through windscreen when you stomp on the whoa pedal.....


                Gearbox has been rebuilt

                Brand New 2nd, and 5th/ / Reverse

                New Synchros
                New Bearings

                New Clutch and FlyWheel fitted

                Need to do a 1000 km then change gearbox oil

                Finally then its time to go to fabractors for - exhaust manifold, down pipe, exhaust, intercooler piping and all plumbing


                  Nothing quite like the feeling of rowing through a new GB

                  Good stuff


                    Got Lines and Fittings to re-do the fuel system Thanks MSCN

                    Click image for larger version  Name:	Lines & Fittings.jpg Views:	0 Size:	214.1 KB ID:	7288402

                    Then got the final parts needed before car can go to Fabricator for Exhaust Manifold, Downpipe, Intercooler Piping and Exhaust (TurboSmart Stealth 40mill Wastegate & TurboSmart PlumbBack Blow off Valve)

                    Click image for larger version  Name:	IMG_20210830_122845.jpg Views:	0 Size:	3.32 MB ID:	7288400Click image for larger version  Name:	IMG_20210830_122849.jpg Views:	0 Size:	3.70 MB ID:	7288401

                    Hopefully before Christmas the B16a will be being breathed upon by the Xona5757s
                    Last edited by Kiwi EK4; 30-08-21, 05:00 PM.


                      Next Stop KustomKraft


                        Out bloody standing my good man

                        Sent from my SM-G960F using Tapatalk

                        RIP Carly - a smile to light the world.

               - making little toys for the big boys


                          Click image for larger version  Name:	IMG_20210903_121235.jpg Views:	0 Size:	4.61 MB ID:	7290250Click image for larger version  Name:	IMG_20210903_145414.jpg Views:	0 Size:	5.40 MB ID:	7290251

                          Alcons are Fitted - now need order custom spacer to clear the Wheels

                          Also measured up all lines for the Fuel system and they have gone off to be crimped now
                          Attached Files
                          Last edited by Kiwi EK4; 03-09-21, 03:38 PM.


                            All back on the ground with 20mm spacer (Was concerned things might go Mexico) but came out spot on tyres still within the guards

                            Next stop fabricators once Covid stuff ends


                              Car is at Fabricators and he is doing some Fantastic Work

                              Manifold is pretty much completed, I can't wait to hear the XonaRotor Spool​​​​​​​

                              Click image for larger version

Name:	image_129860.jpg
Views:	147
Size:	76.2 KB
ID:	7312245

                              Click image for larger version  Name:	Manifold 1.jpg Views:	0 Size:	416.1 KB ID:	7312246


                                Manifold only has external to go:

                                Click image for larger version

Name:	Manifold 4.jpg
Views:	104
Size:	217.8 KB
ID:	7312972Click image for larger version

Name:	Manifold 5.jpg
Views:	104
Size:	76.9 KB
ID:	7312973