Announcement

Collapse
No announcement yet.

WTF to do with lux?

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by ALLMTR
    2ofdem looks like making a few friends

    I can get a 2jz front cut for 3k, another 3 to get it on the road. Would it be worth 10k?
    you know if you do this you wont sell it.

    you ill go run a low 12

    then you will out a gt 42 on it $1500, gate $450, manifold $400, microtech $1500 fuel system $2000, gas kit $1400 and you will go run nines cause you have the macdaddy of engines. this will piss off just as many rich cars as the civic did, if not more, and it will be a shit load more fun
    1JZ747 Racing

    8.37 et PB
    169 mph PB

    Comment


      #32
      agree with 747.. if u go to the effort of finishing the build, you would be foolish to sel it.
      Originally posted by Lobster
      Freeze a gearbox and slide it under his front door

      Comment


        #33
        Originally posted by 747
        you know if you do this you wont sell it.

        you ill go run a low 12

        then you will out a gt 42 on it $1500, gate $450, manifold $400, microtech $1500 fuel system $2000, gas kit $1400 and you will go run nines cause you have the macdaddy of engines. this will piss off just as many rich cars as the civic did, if not more, and it will be a shit load more fun
        You see, your not helping

        Old plates = ALLMTR
        New plates = EBAY9s
        I own a two and a half litre Commodore

        Comment


          #34
          Originally posted by ALLMTR
          You see, your not helping
          As such sell it to Justin

          Comment


            #35
            Put a diesel in it and flog it/ keep it as a work hack.
            Originally posted by Jim
            the only decent six pot holden ever put in a car was the nissan RB30

            Comment


              #36
              vote changed, fuck that shit, sell everything else, leave the ss as is and chuck two beyonces in that mufucka
              Originally posted by Turbo Yoda
              I <3 Hamster

              Comment


                #37
                can you get nomotr plates?
                Originally posted by Turbo Yoda
                I <3 Hamster

                Comment


                  #38
                  honestly which way are you leaning towards? as most have said you would be foolish to do a decent conversion than sell because youll never get your money back. if no one wants to buy as is give sims a call
                  SR20 KE70 currently in progress

                  S14 series 1 now running again:
                  255 rwkW at 18psi

                  Comment


                    #39
                    just an idea buy some cheap chinese 22 inch rims
                    SR20 KE70 currently in progress

                    S14 series 1 now running again:
                    255 rwkW at 18psi

                    Comment


                      #40
                      Originally posted by ALLMTR
                      Hilux 1k (free)
                      2jz front cut 3k (in qld)
                      glide conversion 4k (na stick with A340)
                      gt42 2.2k (can get for 1.5k)
                      hks cams 1.5k
                      manifold 1k (ebay $200 ftw)
                      inj/pump 1k (already have one 044, just need another and inj)
                      microtech 1k
                      ice cooler 1k
                      9 inch 2k (or see how long the lux diff lasts)
                      extra spent on fibreglass panels, alloy seat, blah blah
                      Should make over 1000rwhp. Should run high 8's at 11ty billion mph (or high 9's)
                      Maybe I should take my own advice...

                      Got three weeks off coming up in March. If I get a front cut, I might be able to get the conversion done in that time.....before I change my mind
                      I own a two and a half litre Commodore

                      Comment


                        #41
                        Originally posted by ALLMTR
                        Maybe I should take my own advice...

                        /snip/
                        .....before I change my mind



                        DANGER DANGER WILL ROBINSON. :D :D :D

                        Is anyone else feeling a bit of deja vu here?

                        Speaking as a veteran of many unfinished projects, make sure you are popping some 'single mindedness pills' in the meantime.

                        How's the 120Y going?
                        Cheers, Richard

                        MX83 Cressida Grande - 1JZ-GTE Twin Turbo JZX81 Motor, Fr Suspension in, tailshaft made & installed, bigger fuel pump in, zorst, wiring, fmic done (thanks jzk25) BA rotors R33 Calipers Now REGISTERED going well
                        '92 & '94 TF Holden Rodeo 2.8 TurboDiesel 4WDs - Daily Driver regular breaker/backup ute
                        MS85 Crown Super Sedan - Farm Car - Running 3rd 4M - Future project
                        '66 Jaguar E-Type 4.2 Manual Coupe
                        '66 Jaguar S-Type 3.8 Auto Sedan
                        - Long Term Jobs

                        Comment


                          #42
                          I think you should take Grump Roosters advice :D

                          Comment


                            #43
                            See readers rides for update!




                            Thanx Secoh
                            I own a two and a half litre Commodore

                            Comment


                              #44
                              try to find another motor chuck, half cut you will waste to much moolah.

                              dotn get dry ice cooler, experience shows they arent so crash hot, to big of temp change form start to finish on track.

                              if titan can run 7.80 at 190 without one so can you.

                              engine 1800 to 2000
                              box with bell $400 (if you build up the box like mine $2400
                              stall convetor $ 400 with lockup
                              microtech 30 psi version (ret $1695 iwth x6box) say $1495
                              fugg cams, GAS kit will be cheaper
                              manifold $200
                              piping $ 500
                              intercooler 600x300x90 $750

                              if its not going to be street registered, put it on methanol

                              i reckon its a cost effective package
                              1JZ747 Racing

                              8.37 et PB
                              169 mph PB

                              Comment


                                #45
                                Where can I get a 2jzgte motor for 1800 to 2000? I hear your selling one

                                Someone needs to explain to me how a lux weighs 1330kg? A friggin HX ute doesn't weigh that???
                                I own a two and a half litre Commodore

                                Comment

                                Working...
                                X