whats the moroso slide saying about 3784lbs and 117mph?
Announcement
Collapse
No announcement yet.
any one got a moroso calculator
Collapse
X
-
Hey chris,
3300lb
140mph??Adjustable cam gears for 1FZ-FE now ready for sale - 10 degrees advance/10 degrees retard. Suitable for all variants of 1FZ-FE.
(adjustable scissor gear for changing separation angle between the intake and exhaust cams coming soon)
International sales welcome - PM me for pricing.
Comment
-
interesting.
On the Mainline dyno it spun up 570rwhp to record that MPH.
Had the motor not let go at heathcote, I wonder what the 720rwhp would have delivered MPH wise?Adjustable cam gears for 1FZ-FE now ready for sale - 10 degrees advance/10 degrees retard. Suitable for all variants of 1FZ-FE.
(adjustable scissor gear for changing separation angle between the intake and exhaust cams coming soon)
International sales welcome - PM me for pricing.
Comment
-
Nope not Moroso slide.
I just do the calcs
The web calcs are based off the Moroso slide and the formula is
HP = (trap/234)^3 X weight in lbs
Seans eg.
HP = (140/234)^3 x 3300lbs
HP = (.59829)^3 X 3300
HP = .214159 X 3300
HP = 706rwhp
Then I usually X 85% to put that in DD numbers so 600rwhp or 450rwkw.
You can estimate trap speed from HP as well if you want.
720rwhp would be about 149mph
Also, this method has been very accurate on nearly all the cars I have tried it on. The only one that I remember that it differed greatly was the Top Alcohol car of Mark Brew at 259mph. However, when you are getting to that sort of power levels I think any HP estimates are going to be "very" estimated. FWIW it was about 2500rwhp IIRC.state street drift champion 2003
Formerly known as bassaholic55
Comment
-
Nah chuck-Originally posted by ALLMTRSo 14 more rwhp gave a 3300lb car 9 more mph???
weight and trap speed gives a moroso calculated 706hp, but measured RWHP was 570.
So if Measured RWHP was 720, the moroso calculated number that you'd use to work out potential trap speed would be a bit over 900.
approx 150 mph was what I was expecting-had it held together..........
Never fear-there are 1FZ things afoot. Will advise when it's confirmed.
Adjustable cam gears for 1FZ-FE now ready for sale - 10 degrees advance/10 degrees retard. Suitable for all variants of 1FZ-FE.
(adjustable scissor gear for changing separation angle between the intake and exhaust cams coming soon)
International sales welcome - PM me for pricing.
Comment

Comment