BOSS 335 GT Runs 12s

[2rismo]

This is going to sound obvious, but you have checked the "bypass valve" for a bleed or anything right?

Yeah, we found an eBoost solenoid and two TurboXS bleed valves.

[Dave]

This is going to sound obvious, but you have checked the "bypass valve" for a bleed or anything right?

What do they use the bypass valve for? Surely boost is set by pulley sizing, rather than driving the shit out of the charger and then bleeding off excess boost.

[sirhsv]

You cunts had better get an M1 300 club sticker on that bad boy before it goes back.

This.

[10sec rx7]

328 was the best... after cool down 322 then 317.. still epic for what it is.. 7psi boost...

will be interesting to see if the real 335 have the same pulley...

[TK]

So it has a 77mm top pulley - what is it supposed to be?

Even if it isn't boosted it seems likely the tune is not 'stock' - ie. the one that it will roll down the line with.

Dale better suck that tune out, methinks a lot of guys would like a 'factory' tune that makes that sort of power if the real tune differs a bit.

[2rismo]

bah you fixed it

Hahaha. Suck it.

[Mr Ed]

Well then, off to your local FPV showroom with a set of veneer callipers.

[BigMuz]

Well fuck me crooked.

Might be a 7 litre in there too :D

[<---cop]

Ford's reaction when they learn of this thread...

[Dave]

Well then, off to your local FPV showroom with a set of veneer callipers.

Bill's going to have a meltdown

[BundyBeej]

So the original dyno was out then?

[TJ]

does look the goods.

CAD drawing.. is that you Crompo?

[10sec rx7]

actually 8.5 psi boost

[2rismo]

actually 8.5 psi boost

What was it at peak power and peak torque?

[sirhsv]

CAD drawing.. is that you Crompo?

Its gotta be larko, Im not seeing any watts linkage