Where to get Rodeo rubber flare seals from?

[Purple-Headed Love Truncheon]

i bought some very late last year from patterson cheney toyota here in dandy.
salesman had a few packs on the shelf & i only bought 2 strips...

[15UZU]

do you mean the rubber between the flare and 1/4 panel?

when i did a set for my hilux toy i went to the mitre 10 up the road and bought the rubber off a roll (3mm thick,i *think* 50mm wide flat rubber),cut V`s in it as required to fit the shape,drill the mounting bolt holes in the right spots, used silicone to stick one side of the rubber onto the flare, dry for 5 and bolt it up, worked a treat and cost 3/5ths of SFA,much easier than it sounds too

had them off to fit some 2inch rubber extensions to the outside of the flares,stops a bit more of the mud flicking up the doors

if thats not what your trying to do,ignore me!

[takai]

Yeah, it is what im doing, without having it leak water and look like arse....

[takai]

Yeah, it is what im doing, without having it leak water and look like arse....

[15UZU]

if your more than half talented making your own is easy, just takes a little time, quality of the job is reliant on the person doing it, mine turned out perfect, would never know they`re not genuine.dodgy would be using black sikaflex,which i`ve seen done

if the V is cut the right way the visible side stays untouched

[takai]

Finally got rubber flare seals from this mob here: http://www.fitchtherubberman.com.au/

Tons better than any of the OEM ones, and reasonably priced too.