XR6T 1900rwhp rumour?

[BeverlyHillsCop]

Didnt someone post a youtube vid of some mob building a high powered ford donk with cranks/pistons n shit made specially by cosworth etc??? pretty certain it was on PF.

[TonyJZX]

avo had a 1,000hp barra?

which is probably quite streetable

but obvious its poor compared to 2,000hp

[SkidFace]

You guys are funny .. the world is gonna end in 2012 didntcha know ?? Spend BIG, blow motors hell throw a barra in every pass ....

But i am gonna run a 10sec pass this year WITHOUT a fuckin' snail bolted to my car !

Of course if the world doesn't end next year i am in some MAJOR shit with the bank .................

If no snail, 10sec pass will not cometh?

[10sec rx7]

Theyve been trapping over 220mph for a while now. I dont have a decent moroso to guestimate power though.

only 1 in aus traps over 220

[hiroshimascreamer]

would one of these physically fit in a 4wd sierra cosworth engine bay? that would be pretty nuts (thinking something along the lines of the white r34 gtr smashing everything in the powercruise vid). although 1900hp is probably a bit extreme for those purposes.

[morerevsm3]

If no snail, 10sec pass will not cometh?

he said he would do a 10 without a snail on his car, but it does not say that he will be attempting this 10 in his car

[oxy]

Didn't DynoSteve have a 2000RWHP XR6T years ago?

[0x2DLVR]

i want to see the 1900rwhp dyno sheet as it will be the most ever made on a chassis dyno in this country.. so im calling bull shit....

I've seen more on a chassis dyno. Was a turbo 600ci on methanol and 40psi

[ALLMTR]

would one of these physically fit in a 4wd sierra engine bay? that would be pretty nuts (thinking something along the lines of the white r34 gtr smashing everything in the powercruise vid). although 1900hp is probably a bit extreme for those purposes.

These are a big ass motor that won't fit anywhere easy. , . Well, maybe in a f100

[fritzz]

not sure if use guys have read this

http://speedhunters.com/archive/2010...otorsport.aspx

[Gassed250]

not sure if use guys have read this

http://speedhunters.com/archive/2010...otorsport.aspx

seems as though GAS are building a 2500hp xr6 engine

[GSRman]

Was an interesting size comparison between a 2j and xr6 motor

[2JZR31]

Thats what I am trying to say. With such a large bore spacing, even at the same stroke as a 2JZ it will have a much larger capacity, and therefore have more power potential. That pic is a bit misleading though. With the 2JZ head in the background.

[<---cop]

Awaiting TK to tell us how much each flows stock and with all out porting hotness.

[2JZR31]

Awaiting TK to tell us how much each flows stock and with all out porting hotness.

I think the after porting is what is going to be interesting. My guess is the ford will win here too.