Announcement

Collapse
No announcement yet.

Custom Extractor/header fabricator

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Custom Extractor/header fabricator

    Who's the hotness in custom TIG welded 304 SS ceramic coated header/extractors in Sydney area these days? work would need to be done in situ to circumnavigate the chassis, steering shaft etc.

    I'd provide a spec based on pipemax outputs but ideally looking for a place that knows a decent amount about engines, and exhaust to discuss things, not just merely good TIG welder.
    Last edited by E30is; 13-01-20, 09:48 AM.
    E30 325is M20 3.1L

    #2
    Go see Lizard aka Chris at CHE

    Comment


      #3
      yeah i know of CHE, the other place i've also used before was performance exhaust in northmead but that was like a tailpipe setup which both places seem do most commonly have no idea if they do much in the way of extractors. Found a few examples of extractors from perf exh on FB which looks pretty good haven't found much examples from CHE.

      i thought there might be some gun that specialises only does racing extractors/manifolds with merge collectors and other such wizardry you see at the drags, shame its not the US from this perspective as i know a few places there.
      Last edited by E30is; 14-01-20, 12:37 PM.
      E30 325is M20 3.1L

      Comment


        #4
        Go see Dave at Miller Chassis. He'll do whatever you want. It's Millsi's brother. He's in St Andrews.
        CAD Automotive Paint Correction, like us on the faceballs. Discounts on all detailing and ceramic coatings for PF members

        Comment


          #5
          Chris from CHE custom fabbed the headers on my Belair in situ and the ones he just made for his LS3 EH are drool worthy
          Originally posted by race6.3l
          Only gripes are the bluetooth and stereo are bread and butter spec, not one person has been able to hear me properly during a call, even with my head all contorted towards the roof mounted microphone like im trying to growl a chic sitting on a clothesline

          Comment


            #6
            Originally posted by E30is View Post
            yeah i know of CHE, the other place i've also used before was performance exhaust in northmead but that was like a tailpipe setup which both places seem do most commonly have no idea if they do much in the way of extractors. Found a few examples of extractors from perf exh on FB which looks pretty good haven't found much examples from CHE.

            i thought there might be some gun that specialises only does racing extractors/manifolds with merge collectors and other such wizardry you see at the drags, shame its not the US from this perspective as i know a few places there.
            From that perspective, you also have Craig @ SCF Race Cars, Dve @ Miller Chassis, JB @ Samoracz Race Cars, Mick @ Timic Hot Rods, Brett @ Wicked Industries, Proflo Perf etc If you want that style of header, depending on the motor, most guys are around $3-3.5k for a set

            Comment


              #7
              ok thanks guys
              E30 325is M20 3.1L

              Comment

              Working...
              X