RB26 tappet clearance

[joeluca]

need to know the tappet clearances for RB26 R32 GTR engine, and if possible, how easy are they to adjust, and the sequence of adjustment
Cheers

[Denver]

They don't run tappets..

they run a bucket over shim setup, the bucket is actuated off the cam..

as for clearances, you need to have a clearance of .45mm on the inlet, and .38mm on the exhaust when cold

[joeluca]

to xrw cheers thank you

[Emre]

There is a link to R32 GTR Service Manual in this thread.

http://pforums.company-hosting.com/f...php?t=67198214

[joeluca]

to emrie cheers that will help greaTLY