Announcement

Collapse
No announcement yet.

RB25/30 parts + GTR gearbox

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    RB25/30 parts + GTR gearbox

    I have some stuff left over from previous projects that I can't use anymore.

    Arias forged pistons +.20 suit RB30 with RB26 or late RB25 head. Brand new with rings and pins. Paid $1400. $1000

    RB25 VVT engine and auto gearbox. Complete loom but no computer, 62Klms $600

    Stainless maniflod with T3 flange and external waste gate to suit RB25 $150

    R33 GTR gearbox 78klms $1000

    Graphite head gasket for RB30 $100

    Extra tensioners to suit RB25/30 $50

    Timing belt to fit RB25/30 Dayco $50

    PM if you are interested. Melbourne, no postage unless you want to pay.
    Tags: None
    #2
    offers?

    Comment

      #3
      if the tensioners and belt suits a 26/30 can offer $75 posted to perth

      Comment

        #4
        Yeah its the twin rb30 tensioner setup. So you just mount the second one opposite the original one.
        If that suits, pm your address to me.

        Comment

          #5
          Originally posted by Komdotkom View Post
          Yeah its the twin rb30 tensioner setup. So you just mount the second one opposite the original one.
          If that suits, pm your address to me.
          the one i am after the extra pulley mounts closer to the head,the method of mounting the other pulley opposite brings the belt too close to touching
          i understand i could still use the pulley but the belt probably wouldn't be the right one???

          Comment

            #6
            could you tell me something about the RB25 engine

            like what's it out of and all that shit?
            Originally posted by boxxx

            Deutsche Bahn Rail: Trains are a great way to get lots of people concentrated into a small area, like a camp.
            ACA/TT: Where's the line between a car enthusiast and hoon? There is none

            Comment

              #7
              I have seen both tensioner setups on rb25/30's and they don't seem to be any different. When people say that they are too close, it depends on what you call close. At that point the belt is under tension and bending in the opposite direction, so the chances of it magically touching the other side are slim to none. Anyway I have seen both types used to make way over 300 rwkw at over 7k rpm so imho it makes no difference.

              The rb25 is ex r33. Removed from front cut about four years ago, getting in my way since then. Complete except computer.

              Comment

                #8
                lol

                you've had the motor and box for 4 yrs!

                i'll get back to you - i'm in syd. so shipping could be a bastard
                Originally posted by boxxx

                Deutsche Bahn Rail: Trains are a great way to get lots of people concentrated into a small area, like a camp.
                ACA/TT: Where's the line between a car enthusiast and hoon? There is none

                Comment

                  #9
                  Gearbox is a good price, mate of mine would look at it if in Brisbane.

                  VG30 report?
                  Richard's DatsunZ lappin LakesidZ http://www.youtube.com/watch?v=47OSh...&feature=g-upl

                  “Freedom of speech does not protect you from the consequences of saying stupid shit.”
                  ― Jim C. Hines

                  “Everyone is entitled to his own opinion, but not to his own facts.”
                  ― Daniel Patrick Moynihan

                  “Four hostile newspapers are more to be feared than a thousand bayonets..”
                  ― Napoleon Bonaparte

                  Comment

                    #10
                    Been sidetracked by another project. Still in the wings though.

                    Comment

                      #11
                      I am interested in some parts buddy
                      I am in MELBOURNE also

                      can you please PM me your number?
                      very interested in pistons

                      Comment

                        #12
                        PM sent

                        Comment

                          #13
                          Righto, what if I assemble the engine, anyone want it then?

                          Comment

                            #14
                            Ok what about swaps, I really need to get rid of this shit.

                            Comment

                            Previous template Next
                            Working...
                            X