Announcement

Collapse
No announcement yet.

Fuel system stuff

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    [WANTED] Fuel system stuff

    Dear PF.
    I'm chasing some cheap fuel system stuff for a 13s of 1300s type project.

    We are going to throw together a motor for the track day coming up and I see to have lost/thrownaway/whatever my old spare shit.

    At the moment I need:
    044
    Top feed injectors (maybe 550ccs?)
    I think I've got a reg but might need one as well.
    Surge tank.
    Any other random fuel things you can think of. (Converting carb to EFI)

    Oh and a baby intercooler.

    Thx <3
    1975 TX Gemini Coupe - 1991 VN SS - 2017 VF SS Redline Wagon
    YT: https://www.youtube.com/bucketindustries

    #2
    Ive got a surge tank somewhere I dont need. Will have a look on the weekend.

    Also have an intercooler, but its a big one. I think 600x300x100mm from memory
    #WHOTW award winner #blessed #susanalbumparty

    Comment


      #3
      For reason I can't explain I have a Malpassi rising rate fuel pressure regulator if you want it.
      Sent from my shed, trapped under a collapsed QuickJack, via Tapatalk

      Comment


        #4
        I have some top feeds that were meant to be 550 but I think could be more 444. Haven't been used in a while but I can dig them out if you like. I wish they were 550s as they'd do for now but instead will buy a new matched set most likely. I might have an 040 pump only so that's not much good for you.
        Last edited by Lonx; 22-09-20, 06:31 PM.
        PF Gamers List

        Originally posted by klampykixx
        if a motor has big enough injectors to run say, 7psi but only just starts to max out right on rev limit, will it run more boost lower in the revs without maxing out if you lower the rev limit?

        Comment


          #5
          Originally posted by Lonx View Post
          I have some top feeds that were meant to be 550 but I think could be more 444. Haven't been used in a while but I can dig them out if you like.
          If OP doesn't want I might be interested.
          Norbie!

          Comment


            #6
            I've pulled them out and fairly sure they are only 350cc from SR20VE, sorry guys. I will have CA18DET 370cc also spare soon if any of these will be useful. Given the likelihood that these greens are 350, I'm not going to bother paying to get them flow tested however they were cleaned and new end caps then used for a few thousand k's before being pulled and thrown in a sammich bag so should be ok to run. The 370s have been running in current engine but will be useless for the new turbo so it's time for something decent.
            PF Gamers List

            Originally posted by klampykixx
            if a motor has big enough injectors to run say, 7psi but only just starts to max out right on rev limit, will it run more boost lower in the revs without maxing out if you lower the rev limit?

            Comment


              #7
              If they help you Norbie go for it.

              I'm in limbo with what we are doing with the thing at the moment which is why I haven't replied yet. May be moving soon.
              I'll sort my shit out this weekend/next week if the weather comes good and send some PMs out.

              Appreciate the help from everyone to this point
              1975 TX Gemini Coupe - 1991 VN SS - 2017 VF SS Redline Wagon
              YT: https://www.youtube.com/bucketindustries

              Comment


                #8
                I have a set of 560cc injectors out of an Evo 6. But they are low impedance.....
                Last edited by Death Monkey; 07-10-20, 01:15 PM.

                Comment


                  #9
                  Hey dudes.
                  Got our shit sorted.

                  After probably a more decent fuel reg now. (Turbosmart FPR800ish) and potentially a pump.

                  We've just about sorted the rest of things from donations and shit which I am super grateful for.

                  Thanks!
                  1975 TX Gemini Coupe - 1991 VN SS - 2017 VF SS Redline Wagon
                  YT: https://www.youtube.com/bucketindustries

                  Comment


                    #10
                    I have a Magnafuel MP-9950 fuel reg I was using on the Cressida that I no longer need. It's in a container in the shed so I'll have to go digging for it.

                    http://www.magnafuel.com/efi-regulators.html

                    It's the purple / blue colour.

                    Comment


                      #11
                      Oh don't go out of your way man. We think we've found one locally now to.

                      Appreciate it either way!
                      1975 TX Gemini Coupe - 1991 VN SS - 2017 VF SS Redline Wagon
                      YT: https://www.youtube.com/bucketindustries

                      Comment


                        #12
                        If it in any way helps

                        https://www.facebook.com/marketplace...1348250456688/

                        Comment


                          #13
                          Lol slightly over kill.
                          We managed to find a 070 pump which I think will do the job for now.
                          1975 TX Gemini Coupe - 1991 VN SS - 2017 VF SS Redline Wagon
                          YT: https://www.youtube.com/bucketindustries

                          Comment

                          Working...
                          X