Announcement

Collapse
No announcement yet.

WTBL Bris.. Old PC

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Dunno. I'm pretty handy with old computers but I'm not winning in this instance..
    I'll have some time tomorrow to revisit and have another crack.

    I know it's pretty easy to have issues with incorrect jumper positions etc, but all this junk should be ok in that regard as it used to work as is..

    Comment


      #32
      Originally posted by uuheels View Post
      I'm struggling with this old junk again.
      The computer in question randomly refuses to start up. Usually a few attempts and it goes.
      Today I couldn't get it to boot at all.
      It spins the HDD but doesn't display anything, not even the BIOS stuff at the beginning of the start sequence.
      When I press the power button, the power led blinks, the keyboard lights blink once, the HDD whizzes a bit and that's it.

      Today I swapped all my spares through this thing including 2xPCI vid cards, 1x AGP card, RAM sticks, power supply, CMOS batteries, cloned IDE HDD's, monitors and finally the motherboard that Madhatr gave me with no success.

      Finding replacement PCs from 1999 era hasn't been easy so I'm considering something like this:

      https://www.aliexpress.com/item/Embe...AbTest=ae803_5


      I think the Chinglish is saying it has onboard video, RAM and processor and most importantly, 2xISA slots?

      Any reason this won't run a pure DOS application in a DOS environment properly? (ie not under windows or dosbox etc)
      I understand x86 means it *should* be backward compatible but I can't help thinking it would have a hiccup somehow..

      Any old computer gurus wish to comment?
      Anyone still got their win98 computer they retired in 2001?

      Ta.

      A little late to the party, I garb one of these like 6 weeks ago. As you have I went to turn the old pc on and nothing. Like you I need the two isa slots for the dyno. Well I have not had any problems, mileage may vary. Just use the himemx from freedos.


      Click image for larger version

Name:	motherboard.jpg
Views:	1
Size:	3.27 MB
ID:	6618486

      This Post Brought To You By Brawndo The Thirst Mutilator

      Comment


        #33
        I might have a spare board / cpu from our old dyno pc
        No Power chips thanks

        Comment


          #34
          Originally posted by Masier View Post
          A little late to the party, I garb one of these like 6 weeks ago. As you have I went to turn the old pc on and nothing. Like you I need the two isa slots for the dyno. Well I have not had any problems, mileage may vary. Just use the himemx from freedos.


          [ATTACH=CONFIG]111352[/ATTACH]
          Excellent thank you! That is exactly what I needed to know. This is for my old Dyno Dynamics machine too.
          I've think I've managed to get mine running again with a spare (2000 era) motherboard, but I want to put a complete spare together so I will look into this.

          Comment


            #35
            Originally posted by (pennywise) View Post
            I might have a spare board / cpu from our old dyno pc
            If you have any bits from an old DOS based Dyno Dynamics setup, I'd be very interested

            Comment


              #36
              Originally posted by uuheels View Post
              If you have any bits from an old DOS based Dyno Dynamics setup, I'd be very interested
              Same here I am chasing a new version of the software.

              This Post Brought To You By Brawndo The Thirst Mutilator

              Comment


                #37
                I have v6.130r
                The final dos version was 6.132r so mine is almost the the final version.
                I can help you update if you want..

                Comment


                  #38
                  Originally posted by uuheels View Post
                  I have v6.130r
                  The final dos version was 6.132r so mine is almost the the final version.
                  I can help you update if you want..
                  If you wouldn't mind, I have version 2.7 from memory

                  This Post Brought To You By Brawndo The Thirst Mutilator

                  Comment


                    #39
                    Originally posted by Masier View Post
                    If you wouldn't mind, I have version 2.7 from memory

                    Yeah no problem. Mine came with v2.662!
                    Are you still using an IDE HDD with that Chinese motherboard? If so, do you have a spare?

                    I set mine up to dual boot with WinXP. It makes file manipulation and backups much easier.
                    You can then also print from XP using a more modern printer if you don't have the special parallel to USB printer adaptor for an ancient HP printer needed to print directly from the DD software.
                    Where are you?

                    Comment


                      #40
                      Originally posted by uuheels View Post
                      Yeah no problem. Mine came with v2.662!
                      Are you still using an IDE HDD with that Chinese motherboard? If so, do you have a spare?

                      I set mine up to dual boot with WinXP. It makes file manipulation and backups much easier.
                      You can then also print from XP using a more modern printer if you don't have the special parallel to USB printer adaptor for an ancient HP printer needed to print directly from the DD software.
                      Where are you?
                      Haven't found a good, old hdd in years. I started using these "40pin PATA IDE DOM Disk female Disk On Module Vertical Socket 2-Channel 4GB 8GB 16GB 32GB 64GB MLC For CNC Industrial equipment" and it has saved a lot of heartache.

                      As for win xp I am far more simple than that. I use freedos and set one of the usb ports up for my usb stick in the bios. Xcopy everything to that turn the machine off unplug it and plug it in to the other machine to print. Was toying with qemu-kvm on a linux distro and passing the isa cards to a dos VM. I came to my sensors before hand, and the above works for me.

                      I am around 10hours north of Perth.

                      This Post Brought To You By Brawndo The Thirst Mutilator

                      Comment


                        #41
                        PM sent.

                        Comment


                          #42
                          bad video card or ram will just hang the system without bios displaying.

                          Anything that era with ISA slots has a legacy bios and is 100% fine to be running in a dos environment.
                          Originally posted by Buford T. Justice
                          This happens every time one of these floozies starts poontangin' around with those show folk fags.

                          Comment


                            #43
                            I have some old stuff still lying about if it's useful...

                            IDE drives, maybe some old ddr, motherboards and cpu's unlikely but I might have. Basic sound pci / ide sound cards etc.
                            PF Gamers List

                            Originally posted by klampykixx
                            if a motor has big enough injectors to run say, 7psi but only just starts to max out right on rev limit, will it run more boost lower in the revs without maxing out if you lower the rev limit?

                            Comment


                              #44
                              I managed to get yours running Madhatr.

                              I was trying it with the last possible combo of parts and it fired up. I literally dropped my jaw
                              It's been 100% solid for the last 2 days.
                              I still want to put a spare together though (which is what yours was supposed to be
                              Thanks again. It got me out of the shit.

                              Comment


                                #45
                                Originally posted by Lonx View Post
                                I have some old stuff still lying about if it's useful...

                                IDE drives, maybe some old ddr, motherboards and cpu's unlikely but I might have. Basic sound pci / ide sound cards etc.
                                DDR is too new, it's SD100 and SD133 here
                                I'd be interested if you had any motherboards with ISA slots or any really old AGP or PCI vid cards.
                                Ta.

                                Comment

                                Working...
                                X