Trailer

[F|sh]

I've got an issue with my trailer. Seem to have everything at the plug working fine but when I get to the lights. I only have indicators and No stop /tail.

Checked globe and needs two new ones on one side but that should not stop the from working?

[Tripper]

sounds like they might be wired in series, IE out put of 1 globe goes to the input of the other globe, 1 blown globe = both not working

[Shonky]

sounds like they might be wired in series, IE out put of 1 globe goes to the input of the other globe, 1 blown globe = both not working

Series would be dumb (for that reason) and would require 6V globes too. Unlikely.

[irsa76]

When you say it's fine at the plug, do you mean you have power out of the plug when you check the wires?
Are you getting power to the lights at all? I've seen trailer lights where the terminals have actually broken between the wire and the bulb holder.