Announcement

Collapse
No announcement yet.

Battery bus bar

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Battery bus bar

    Need to make an extension for a terminal on my circuit breaker as the terminal is too short to add the required wires. Can I just make it out of steel or do I have to source some brass/copper? It’s only going to be around an inch long.
    I own a two and a half litre Commodore - 8.93 at 142mph

    #2
    Originally posted by ALLMTR View Post
    Need to make an extension for a terminal on my circuit breaker as the terminal is too short to add the required wires. Can I just make it out of steel or do I have to source some brass/copper? It’s only going to be around an inch long.
    Long term or short term? If it's temporary use whatever...but anything you want to stay, I'd use brass or copper.
    Originally posted by PLAYA
    World's richest women again via divorce.

    Originally posted by piss98
    fuck I'd be happy to suck Bill Gates off

    Comment


      #3
      Aluminium
      Lots of minis & mokes including a G13b powered Sports Sedan, a couple of Swift Gtis, a Goggomobil, Porsche 928S, Polo Gti, BMW 540i, a WRX and a few others.

      Comment


        #4
        What size will the bracket be?

        I'd use aluminium if I didn't have copper.

        Comment


          #5
          Thanks guys, I’ve ordered some 6mm thick brass strap off ebay. Only needs to be 1 inch x 2 inches
          I own a two and a half litre Commodore - 8.93 at 142mph

          Comment


            #6
            I have some smaller stuff here too if you need more. Happy to throw a bit in an airbag if you get stuck.

            Comment


              #7
              All good, thanks
              I own a two and a half litre Commodore - 8.93 at 142mph

              Comment

              Working...
              X