Announcement

Collapse
No announcement yet.

Got a 3D printer now, it's fun!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I have always liked E3D Hotends, they have done me well./
    CISCOKIDS
    The Gentlemen's Club
    Midnight Rocker

    Comment


      New Prusa XL looks pretty stonks

      Comment


        Originally posted by ROBAPHENT View Post
        I have always liked E3D Hotends, they have done me well./
        Got one and had it on for a bit but the mount means I lose bed real estate, it worked well though.

        Don't mention the adBlocker !!

        Comment


          Originally posted by MWP View Post
          I've been sticking to printing PETG (PolyLite) with a CR6-SE (great printer btw).
          No enclosure, stock bed, bed at 80, nozzle at 245, no fan. Almost perfect, strong prints every time.
          No issues with lifting prints at all, and the print separates itself off the bed when the bed cools off.
          Hmmmm might give those settings a crack

          Comment


            Originally posted by MZ21 View Post
            Hmmmm might give those settings a crack
            If you're switching between PLA and PETG make sure you use a new nozzle and give the nylon tube a little trim.
            The PLA will burn at those temps, so any left in there will cause issues.

            Comment

            Working...
            X