Announcement

Collapse
No announcement yet.

Dust & fume extraction options

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dust & fume extraction options

    Got a little fabrication room set up at work. While I run a fan for the room to circulate fresh air, it's ok at best so I've been looking at a few options for a portable fume extraction unit & some extraction fans for the room itself.

    Anybody have a similar setup? Any recommendations or if you know of a company who can provide an extraction unit and install fans into the room would be awesome!

    #2
    How many cubic somethings is the room?

    How well sealed is the room now?

    Is it climate controlled?

    Comment


      #3
      Originally posted by chartreusehj View Post
      How many cubic somethings is the room?

      How well sealed is the room now?

      Is it climate controlled?
      Room size is roughly 8m x 10m. The room itself is fairly well sealed, I did remove a door to get some more airflow through it but can always put it back. No climate control or A/C etc.

      Comment


        #4
        Ended up getting one of these - https://www.machineryhouse.com.au/W270

        Not a bad unit, bit noisy but sure does the job. Only complaint is the dicky bendy hose for the filter head but it's not the end of the world.

        Comment

        Working...
        X