Announcement

Collapse
No announcement yet.

Dust & fume extraction options

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • foamy
    replied
    Ended up getting one of these - https://www.machineryhouse.com.au/W270

    Not a bad unit, bit noisy but sure does the job. Only complaint is the dicky bendy hose for the filter head but it's not the end of the world.

    Leave a comment:


  • foamy
    replied
    Originally posted by chartreusehj View Post
    How many cubic somethings is the room?

    How well sealed is the room now?

    Is it climate controlled?
    Room size is roughly 8m x 10m. The room itself is fairly well sealed, I did remove a door to get some more airflow through it but can always put it back. No climate control or A/C etc.

    Leave a comment:


  • chartreusehj
    replied
    How many cubic somethings is the room?

    How well sealed is the room now?

    Is it climate controlled?

    Leave a comment:


  • foamy
    started a topic Dust & fume extraction options

    Dust & fume extraction options

    Got a little fabrication room set up at work. While I run a fan for the room to circulate fresh air, it's ok at best so I've been looking at a few options for a portable fume extraction unit & some extraction fans for the room itself.

    Anybody have a similar setup? Any recommendations or if you know of a company who can provide an extraction unit and install fans into the room would be awesome!
Working...
X