Announcement

Collapse
No announcement yet.

light truck ifs.

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    is it a big name one ? no one in bh bends truck axles. not that i've seen anyway. it seems to be either adelaide or dubbo.
    Originally posted by Skompa
    The throttle linkages jammed on the CDs in my old Triumph 2000 and stuck it at WOT.

    I didn't realise for about 15 mins as it never broke the speed limit.

    Comment


      #17
      Yeah, but there are two and I can't remember which side of town he is on either!

      Comment


        #18
        Presuming the chassis is straight then one of your suspension componets has had it.

        If you want to keep it stock dennis carpeter is your friend. Otherwise you have so many aftermarket places in the US ....

        Comment


          #19
          who is dennis carpenter ? i'll jack it up again and have a look. i haven't had much luck with the yanks. might've been looking in the wrong places. never mind. just googled it. impressive !
          Originally posted by Skompa
          The throttle linkages jammed on the CDs in my old Triumph 2000 and stuck it at WOT.

          I didn't realise for about 15 mins as it never broke the speed limit.

          Comment


            #20
            Pretty sure Truckalign know all the tricks with these things. Otherwise ask at your nearest Ambo workshop if they can remember who they used, and what settings if different.
            Even the yanks reckon these have crap front ends, if it was a 4x4 I'd say straight axle the thing.

            Comment

            Working...
            X