Announcement

Collapse
No announcement yet.

Exhaust Design Questions

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
    #46
    Originally posted by Soopy View Post
    Earmuffs!?

    Real men go deaf.
    130+db.. My meter peaked out.

    Yeah M.J I thinks that's the best option for non bi-plane sounds. I will have to see if an exhaust shop will sell me some bends and a x-pipe off the shelf.
    Originally posted by S
    I just want to apologise for some of my shit talking back around page 5.

    Comment

      #47
      Don't be a homo. Just make an x pipe out of two 180 degree bends. Cut a bit off the back of each bend and weld together.
      Originally posted by RVK 355
      Hold it flat cunt

      Comment

        #48
        Originally posted by Soopy View Post

        Is it out of the question to use two mufflers and just stack them on top of one another? Bit of a bogan setup but provide there is space it should work.
        yep seen this a few times too - definitely space for it!


        i dunno what kind of muffler this is being so stubby but another interesting setup
        Originally posted by Walt Kowalski
        Memes are only detectable by NSA.

        Comment

          #49
          That seems the easiest way to fix the issue. Nothing fancy.

          KISS works, unless you're female.
          Originally posted by oioioioioi
          I've never said or implied everyone on that page was a deadshit - just that there's a concentration of deadshits there. Think of it like a mine, but instead of a rich vein of gold bearing quartz, it's a rich vein of spastic bearing facebook posts.
          Originally posted by Sketchy
          Any peanut who thinks they could have done it better from the comfort of their armchair or work desk is a genuine mong level potato.

          Comment

            #50
            the first setup shown in clutch-monkeys post with the rest of the piping in place is certainly the ideal one.
            Originally posted by myshortyboomba
            I've had many gauges in cars. I always found the conrods react faster than a gauge.

            you can always hear them when they break and they stop the engine immediately so you can't do any more damage.

            Comment

              #51
              jim - looks close to what you were proposing:
              http://forums.pelicanparts.com/porsc...e-exhaust.html

              I've seen a couple of iterations of both Steve and Jeff's mufflers. They are pretty popular up here with the spec 3.0 liter racers and the vintage racers. They do all have crossovers of one kind or another. I know Steve is pretty convinced that a crossover is important, and he has done the testing to support his position. From what he has posted on here (and I kind of hate to speak for him...) it sounds like the internal crossover construction of the dual in / dual out Magnaflow is a worthy substitute for all the extra external plumbing.

              The Magnaflow is actually meant to have both inlets together on one end, with both outlets together on the other end. Think running it lengthwise down middle of a muscle car. Internally, it's just two perforated tubes crossing in the center, so a V-8's left bank exhaust is actually mostly coming out the right pipe, and vis versa, with the two mixing in the middle where they cross.

              In our application, with the two inlets opposing one another and essentiallyalmost blasting away at one another, that center mixing just has to be a bit more violent. All I can imagine (and I may be quite wrong) are high pressure exhause pulses crossing one another in that middle "X" like cars in the middle of a "figure eight" race. Except ours never collide, due to the even fire nature of our motors, and equal length primary and secondary header pipes.
              Originally posted by Walt Kowalski
              Memes are only detectable by NSA.

              Comment

                #52
                Very interesting that the flow set up is more or less the same as what we need! Well I'd better start looking for one elcheap'o.

                Or...
                http://www.ebay.com.au/itm/MUFFLER-2...#ht_500wt_1129
                http://www.ebay.com.au/itm/EXHAUST-P...#ht_945wt_1114
                Originally posted by S
                I just want to apologise for some of my shit talking back around page 5.

                Comment

                  #53
                  same system, seems the way to go. guy says barely tolerable for the street so looks like it's exactly what's needed!
                  Originally posted by Walt Kowalski
                  Memes are only detectable by NSA.

                  Comment

                  Previous 1 2 3 4 template Next
                  Working...
                  X