Announcement

Collapse
No announcement yet.

Fuel system questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fuel system questions

    Wasn't sure of the exact area to place this under, but I'm in need of some assistance. Helping a friend out with their project and unsure of what path to take. The car in question is a 2012 Toyota 86 GTS, fitted with an open deck, forged FA20 (Carrilo rods, CP pistons, 10:1 static compression). To compliment the motor, it has an AVO "stage 3" Turbo kit, DeatschWerks 1000cc port injectors, Motec M150, and a few other goodies. Previously, it was running a DeatschWerks 265L/hr pump, but sitting for 5 months, with half a tank of E85, the pump has shit itself. The question I really have, is what intank pumps are suitable, and can easily be fitted to the 86 hanger as a replacement, and where can I source one pretty much yesterday?

    #2
    Golebys, dw400
    I own a two and a half litre Commodore - 5.80 at 121mph

    Comment


      #3
      And flow the injectors
      3D scanning
      3D modelling
      Structural certification
      3 and 5 axis milling

      Comment


        #4
        Originally posted by PLAYA View Post
        And flow the injectors
        That got done today. Cleaned and flowed.

        Comment


          #5
          And change the filter

          Comment

          Working...
          X