Cheapest brake rotors! Fast delivery!

[TJTime]

Ralliart Magna / Evo 4 non brembo front slotted disks, normal 2002 TJ magna rear disks

And whatever reasonably priced high performance street pads for the above that you'd recommend?

[gslrallysport]

Hi mate,

Prices as follows:
- Front RDA Slotted $209 for the pair
- Rear RDA Standard $35 each
OR
- Front DBA 4000 Series Slotted $165 per rotor
- Rear DBA Street Series Standard $41.04 each

Pads, I'd go QFM HPX, which are a Bendix Ultimate equivalent, but low dust and rotor wear. $79 per set front or rear.

Any other questions just let us know!

Regards,
Greg

[lickmyleftone]

Hi Chris,

Sure can mate, quoted up on these for the freight company next to us not long ago.

Rotor options:
- DBA Street Series Front $107.91 each
- DBA Street Series Rear $N/A
- RDA Front $117 each
- RDA Rear $108 each
- Remsa Front $123.75 each
- Remsa Rear $99.83 each

Pad Options:
- Remsa Front $118 for the set
- Remsa Rear $110 for the set

There's a few other pad options (like EBC etc.) but for the money the European made Remsa (rated to 650 degrees) are very hard to go past. With regards to rotors, again, the European made Remsa would be the pick, versus RDA which are made in China. DBA only do the front at this stage. All rear prices are based on it being a solid rear rotor, just check. (Most were, only the 50 series got the vented as far as I know).

Any other questions just let us know!

Regards,
Greg

Thanks for the fast reply Greg. Those prices are very good. Will get in touch when ready to order cheers Chris.

[gslrallysport]

No dramas at all mate, speak to you then!

[St00ge]

Hey Greg

What's the go with a a BA Falcon GT-P with the brembos? probably looking at discs and pads all round.

Cheers
St00ge

[spindoctor]

Hi Greg,

Writing on behalf of my bro in law, he's got an AP racing BBK on his Audi A4 1.8TQ (B6) for the fronts. I believe they're this ones :-

http://www.apracing.com/ProductDetai...ProductID=1515

Are you able to supply replacement rotors and hats(i understand cant be reused?)?

[gslrallysport]

Hey Greg

What's the go with a a BA Falcon GT-P with the brembos? probably looking at discs and pads all round.

Cheers
St00ge

Hi St00ge,

Which Brembo package has it got? The 6/4 pot or 4/4 pot?

Cheers,
Greg

[gslrallysport]

TODAY ONLY - HALF PRICE BRAKES!

Until 7pm AEST today, purchase any full vehicle set of shocks and springs (including DMS coilovers!) and we'll do a matching full vehicle set of brake pads and rotors half price! Give your car the complete make over it deserves!

Conditions:
- Today only! No exceptions. We're staying open till 7pm to allow for those that don't get emails till after work!
- Excludes Project Mu.
- Excludes already discounted items, such as suspension pacakge deals.

That's it! Any questions at all give us a call on 1300 884 836. As always, you can reply to this email, but due to the very large volume of emails we get when we do specials, we recommend calling up so you don't miss out!

Regards,
GSL RallySport Sales Team - Greg, Nathan and Matt!

[MR 1JZ]

who decides on your font for emails Greg?

this bloke?

[SHEEL]

Just sent an email via your website...

looking for Nissan Pathfinder rotors and pads (front)

[Gavatron]

Hi Greg,

I'm after a set of rear rotors and A1RM's to suit an AE112 Corolla. Also, what do you have on offer to suit Wilwood Dynalite calipers with Pad Type 7112?

[stockymcstock]

Greg, what have you got in the way of extreme high-temp pads to suit a GTIR pulsar (AD22VF caliper)? I melted the last pair of QFM A1RM's I got from you within a few laps of winton, they were completely trashed. Someone recommended the Ferodo DS3000 - what have you got that will handle extreme heat? The rotor is quite small unfortunately and it doesn't cope well stopping a car with 350hp/ton!

[Boxer]

Just wanted to give this Supplier another shout out!

Greg and his team have fantastic product and service,

My Cayenne needed new brakes at its last service and whilst it was on the hoist at Porsche Centre Gold coast - the dealer rang with the price for new pads. After I picked myself up off the floor, I rang Greg and he had a full set of front pads made to OEM spec complete with electronic sensors dropped into Porsche that evening for fitment the next day.

All at one quarter the price and the performance is every bit as good as genuine

Thanks guys!

[spiller]

After prices on:

RDA slotted rear rotors for 2005-2008 WRX Sti plus shipping to SA, 5082

Also performance friction PFC01 pads to suit CP9A evo REAR.

Cheers

[gslrallysport]

Greg, what have you got in the way of extreme high-temp pads to suit a GTIR pulsar (AD22VF caliper)? I melted the last pair of QFM A1RM's I got from you within a few laps of winton, they were completely trashed. Someone recommended the Ferodo DS3000 - what have you got that will handle extreme heat? The rotor is quite small unfortunately and it doesn't cope well stopping a car with 350hp/ton!

Going up from the A1RM I'd jump to Project Mu, which are the stand out leader in the absolute top end stuff right now. Choice of all bar about 2 V8 Supercar teams. I'd go the Club Racer pad, which is VERY similar to the H16-03 (V8 Supercar pad), but tempered a little differently, so no where near as expensive. To suit your GTiR would be $331.55 for the front, and $303.05 for the rear. You'd probably have to allow a month for manufacture though as I wouldn't imagine they'll be available off the shelf.

What rotors were you running the A1RM on?