User Profile

[kedderz]

Lots more room for activities in the sw20 bay compared to the aw11.

how much power it make?...

[kedderz]

Jack Nicholson?

[kedderz]

they removed the tail shaft IIRC

[kedderz]

Its like looking at a bad decision turning into the worst decision.

[kedderz]

no fb here, whats the hotness these days as teamviewer seems to be shit.

edit - have setup https://remotedesktop.google.com/...

[kedderz]

I've no way of knowing if the current fuel map is remotely suitable for the engine.
440cc injectors, 2.0, 4cyl

Tables below;

500


1000


1500


Broadchest - up for...

[kedderz]

1500 arrives today, I'm just curious to see if I can get it running is all, learning as I go.

[kedderz]

How does one know what the pulse width for the injectors is to be ? Maybe ill just reduce the Ms across the whole maps 500-1500?...

[kedderz]

From what I can see in the software, there's no injector size to set it just pulses a certain Ms value.

Dizzy/leads is setup according to the workshop manual so that appears correct to. Maybe the wiring it self is incorrect?

[kedderz]

verified mech timing this arvo
with trigger angle of 60, type of standard, injectors disabled I was able to see on cranking 10 btdc
enabled the injectors and it still over fuels like a mother fucker tonnes of black smoke when multipoint injection...

[kedderz]

trigger type would be multi, number of teeth 24 tooth offset 1?
trigger input edge rising or falling?
home edge falling or rising?
trigger angle ive read should be set to 70 or 65?

[kedderz]

ignition types ;

standard ecu mode


advanced ecu mode



fuel setup
available injection mode - seq, multipoint, batch, staging
...

[kedderz]

the more you know, manual says number of inj events per trigger should be half the number of cylinders, is that the same across all the inj types? so I should be selecting 2 ?

[kedderz]

just watched it then, fuel only old school thing nice video but nothing I didnt already know.

RE injection, this is what the manual says; which confuses me as firing all the injectors together would result in some getting fuel when its on...

[kedderz]

yep comes out from the dizzy to the black box then out into the ecu.

should I be setting multipoint injection or batch? reading the manual multipoint fires all injectors together????...

[kedderz]

Check out mr fancy pants with his running driving project car......

[kedderz]

The plot thickens hey, no markings on it all cept haltech.

[kedderz]

Any idea what this is ? Come from the dissy then out again, some sort of signal changer ?

https://i.imgur.com/jmILm0j.jpg...

[kedderz]

I shall research what you just said then so just that....

[kedderz]

E6Hv634 is the version, I got it from the haltech website.
to get the internal reluctor stuff to show you have to change the trigger type to multi then change the tigger to reluctor, but the setting doesnt save and the manual says its hall effect...