User Profile

[Bob Vegana.]

Height's not great with them.

More often than not I need to use some ramps, in order to get the jack under the crossmember.

I don't think I'd consider it a quick lift jack....

[Bob Vegana.]

I got about 6 years out of mine as well.

Bought a similar sized one from Sydney Tools, but it's not as nice and a bit heavier.

Look at the Bahco ones that Total Tools has.

[Bob Vegana.]

Centre bearing in the tailshaft....

[Bob Vegana.]

Shit, totally forgot to order one. Will get onto it and report back.

[Bob Vegana.]

Someone's drilled the bolt and hammered a Torx bit into it. Which is normally fine when you use an impact one, which that doesn't appear to be.

Besides that, the head is trashed unfortunately....

[Bob Vegana.]

Watch the V6 autos. They break flex plates.

[Bob Vegana.]

Probably won't show much.

If there's a did cylinder, most modern ECUs will drop that cylinder anyway when the fault is logged.

[Bob Vegana.]

Don't ruin your good shoes on the petrol pissing out of it, Doris.

[Bob Vegana.]

Dicky choke?