User Profile

[GSRman]

if you have the resistors in series with the LED the LED's will see a lower voltage? they need to be in parallel?...

[GSRman]

Would be interesting to know if it's ADR compliant to remove a demister from a vehicle where it's fitted standard - surely there's no argument that it's reducing safety?

In the ACT speed...

[GSRman]

I FKNlol'd...

[GSRman]

Doesn't that arrow yellow gemini coupe run flat 9's on a spooled gemini diff? - and made over 800hp at summernats?

I had a custom LSD made up from BW bits like 22 years ago - but the guys...

[GSRman]

I run two 044's - but mostly because it has to pump enough at 75psi rail pressure...

[GSRman]

sounds like your surge tank is getting emptied - it's not going to be the high pressure pump - because fuel flow at WOT, your return from the rail goes back to the surge tank?...

[GSRman]

I'll expect her call imminently...

[GSRman]

so the answer to the question - more complicated than expected if I'm honest.

Falcon - definitely bottom of the seam is loaded against the bottom of the slot in the jack - starting to lift...

[GSRman]

correct - and not top spec - and distinctly lighter than the Tesla... hence ford VP was all 'ship us over one and we'll do the apples for apples' - which of course Elon jumped on - probably has his nerds...

[GSRman]

actually - having an F150 for scale - not sure they will ever go on sale in aus..

...

[GSRman]

4wd (dual motor) job with 400km range @ 75ish would be a winner - would sell an awful lot awful quick....

[GSRman]

wasn't the model 3 30k in the us and 65kAU? (base model) so 39? 80 and 2wd?...

[GSRman]

So I thought you would actually want the force on the base of the seam? isn't that what it's there for? and where factory jacks lift? eg they have a slot only to locate the jack on the seam?...

[GSRman]

problem is fuel economy relies so much on the driver etc than the car..

I remember seeing a well documented case of some grey nomads that were dragging a 3t 5th wheeler around and were turning...

[GSRman]

well they don't let anyone else fix them - so i assume they replace the panels -

[GSRman]

I think they sold R34 GTR's until 2004/5 - via nismo etc.. but not RB25...

Anyone going to actually notice - if you get an RB25 Neo version with the engine cover etc & claim it's out...

[GSRman]

It's just a hardish stainless - it won't stretch very well - (unless using a heat process - and then they would need to clean oxides/colour etc) - it's 100% price - think how cheap it's going to be...

[GSRman]

we have just been using the rubber pads - on the jacking point seams - but still just he rubber pads....

[GSRman]

and still 146k pre-orders with $100 deposits in two days...

[GSRman]

but - the electric quad - and ramp - and charging... thats pretty cool yeah.....