Checked over car before Winton and removed front struts for revalve.
Noticed all bolts that hold strut to upright are bent. That can't be good. I don't know what it means though. Maybe I overtorqued? Maybe something else is happening?...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
1:10.8x
I might redo the exhaust. When I fitted second hot dog I never put back on dyno, slightly suss as my terminal speeds were down. But it was quite hot.
May have also found a hook up for a header.
Back attempting...
Leave a comment:
-
Needs more spring. Outside front is bottomed here. Angle of bumper to road shows amount of roll.
Sent from my SM-N960F using Tapatalk...
Leave a comment:
-
Rpf1 Not here in time.
Went slower than last time. 2 tenths.
A052 resulted in a lot of understeer. Going to need to up the spring rates a fair bit once again.
Hot day. Brake pads must be about fucked.
...
Leave a comment:
-
Be good if some Vic cunce were able to get on track.
I'm hanging for a day at PI before I start making changes.
Just need a good method to mount the camera! Any ideas?
Sent from my SM-N960F using Tapatalk...
Leave a comment:
-
I don't know if I believe the number but who knows. Might have to line up against some similar nuggs at the next event.
Hopefully we get to do broadford this Sunday if the lockdown gets lifted. Not super confident.
I'm still...
Leave a comment:
-
Stock v exhaust dump.
Looks little fat up top
Sent from my SM-N960F using Tapatalk...
Leave a comment:
-
Run it on dyno, dropping rear exhaust section gained 5kw which was substantial
Although the numbers were generous. After I modified rear section and re ran on dyno the power figure was no better.
But old mate said he had the...
Leave a comment:
-
They are 949racing 6ul in 15x9 +36. Only have two of them though. Down the track I'd like to put some serious tyres on it.
Can't run anything bigger than a 15x7 For nuggs sadly, but will fit a 205/50 a052 in the coming days
...
Leave a comment:
-
15x9 fits tuff in standard arches.
Sent from my SM-N960F using Tapatalk...
Leave a comment:
-
I've had a fair bit of practice pulling things, so it just came off for me. If you're feeling really exotic give it a little twist at the same time, comes easier that way.
Sent from my SM-N960F using Tapatalk...
Leave a comment:
-
Yeah as above.
Just keeps the flap open all the time.
Parked yaris next to my other nugg for comparison.
Sent from my SM-N960F using Tapatalk...
Leave a comment:
-
Put firmer front springs in again to try on a working bee/ practice day yesterday. Up now with a 11kg. Also using a short 3kg helper which at ride height is coil bound.
Seat of pants says that it is quicker to respond to inputs and pyrometer...
Leave a comment:
No activity results to display
Show More
Leave a comment: